INSPECTION
Inspection · Vehicles built from Jan 2015
Versions by build date: Oct 2014 – Dec 2014 from Jan 2015
| INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY |
Check the resistance.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68°F)
6.9 to 7.9 Ω
Check the operation.
Apply battery voltage between the terminals and check that the spool valve operates.

- OK:
- The spool valve is not stuck
Text in Illustration *a
Component without harness connected
(Camshaft Timing Oil Control Valve Assembly)
*b
When voltage is applied (advanced side)
*c
When voltage is not applied (retarded side)
*d
Spool Valve
- HINT:
- Problems in the spool valve returning caused by sticking of sludge or foreign objects sometimes cause slight pressure leaks to the advanced side and result in detection of DTCs.
