REMOVAL
Removal / installation · Vehicles built Oct 2014 – Dec 2014
Versions by build date: Oct 2014 – Dec 2014 from Jan 2015
| 1.
DRAIN BRAKE FLUID |
 |
- NOTICE:
- Wash off brake fluid immediately if it comes in contact with any painted surface.
| 2.
REMOVE BRAKE MASTER CYLINDER |
 |
- Using a union nut wrench, disconnect the 2 brake tubes from the master cylinder.
Disconnect the warning switch connector.
- for Manual Transmission:
Slide the clip and separate the clutch reservoir tube.
- Remove the 2 nuts, and disconnect the bracket.
Remove the brake master cylinder from brake booster.