2014-2019 Hiace · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built from Oct 2014


1. DRAIN BRAKE FLUID

2. REMOVE FRONT WHEEL

3. REMOVE FRONT BUMPER

for Standard Body:
(Click here)

for Wide Body:
(Click here)


4. REMOVE FRONT MUDGUARD

  1. C102543
    Remove the 3 clips and the front mudguard.


5. REMOVE BRAKE ACTUATOR ASSEMBLY WITH FRONT BRAKE TUBE WAY NO. 1

  1. C102545
    Release the lock lever and disconnect the actuator connector.

  1. C102546
    Using a union nut wrench, disconnect the 6 brake tubes from the brake tube way No. 1.

  1. C102547
    Remove the 5 bolts. Remove the brake actuator assembly together with the front brake tube way No. 1 and brake tube.

    NOTICE:
    Do not bend or damage the brake tube.

    HINT:
    Remove these in the direction of the front of the vehicle.


6. REMOVE BRAKE TUBE

  1. C102548
    Using a union nut wrench, remove the 5 brake tubes and the brake tube way No. 1.


7. REMOVE ACTUATOR BOLT COVER

  1. C102549
    Remove the 2 nuts and the actuator cover.


8. REMOVE BRAKE ACTUATOR ASSEMBLY

  1. C102550
    Remove the the 2 nuts and brake actuator assembly from the brake actuator bracket.

← COMPONENTS (from Oct 2014)DISASSEMBLY (from Oct 2014) →