2014-2019 Hiace · Service Manual BRAKE

INSTALLATION

Removal / installation · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017


1. INSTALL SPEED SENSOR FRONT

  1. C106110E01
    Install the front speed sensor to the steering knuckle with the 2 bolts.

    Torque:
    Bolt A:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
    Bolt B:
    8.5 N*m{ 87 kgf*cm , 75 in.*lbf }

    NOTICE:
    Prevent foreign matter from attaching to the sensor tip.

  1. C106109
    Install the bracket to the upper arm with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. C106108
    LH side:

    1. Connect the connector.

    2. Engage the clamp to the body.

  1. C113672
    RH side:

    1. Connect the connector.

    2. Engage the clamp to the bracket.

    3. Install the bracket with the bolt.

      Torque:
      8.0 N*m{ 82 kgf*cm , 71 in.*lbf }


2. INSTALL FRONT WHEEL

Torque:
100 N*m{ 1,020 kgf*cm , 74 ft.*lbf }


3. INSTALL ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY (RH POSITION)

4. INSTALL FRONT DOOR SCUFF PLATE RH (RH POSITION)

5. INSTALL FRONT SEAT ASSEMBLY RH (RH POSITION)

  1. B107528
    Connect the front seat inner belt assembly connector and install the front seat assembly.

  1. Align the front seat assembly adjuster pin with the holes in the body.

  1. Move the front seat assembly to the rearmost position.

    NOTICE:
    Make sure that the front seat assembly is securely locked.

  1. Temporarily tighten the 2 bolts on the front side of the front seat assembly.

  1. Move the front seat assembly fully forward.

    NOTICE:
    Make sure that the front seat assembly is securely locked.

  1. Temporarily tighten the 2 bolts on the rear side of the front seat assembly.

  1. Move the front seat assembly to the rearmost position.

    NOTICE:
    Make sure that the front seat assembly is securely locked.

  1. Fully tighten the 2 bolts on the front side of the front seat assembly in the order of outer and inner side.

    Torque:
    39 N*m{ 398 kgf*cm , 29 ft.*lbf }

  1. Move the front seat assembly fully forward.

    NOTICE:
    Make sure that the front seat assembly is securely locked.

  1. Fully tighten the 2 bolts on the rear side of the front seat assembly in the order of outer and inner side.

    Torque:
    39 N*m{ 398 kgf*cm , 29 ft.*lbf }


6. CHECK SPEED SENSOR SIGNAL
(Click here)
← INSPECTION (from Oct 2014)INSTALLATION (Jan 2015 – Mar 2016) →