2014-2019 Hiace · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015


1. REMOVE FRONT SEAT ASSEMBLY RH (RH POSITION)

  1. B107528
    Move the front seat assembly fully forward.

  1. Remove the 2 bolts on the rear side of the seat.

  1. Move the front seat assembly to the rearmost position.

  1. Remove the 2 bolts on the front side of the seat.

  1. Move the front seat assembly to the center of the seat slide rail. Set the seatback in the upright position.

  1. Disconnect the front seat inner belt assembly connector.

  1. Remove the front seat assembly.


2. REMOVE FRONT DOOR SCUFF PLATE RH (RH POSITION)

3. REMOVE ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY (RH POSITION)
  1. Roll up the carpet and remove the engine service hole sub cover.


4. REMOVE FRONT WHEEL

5. REMOVE SPEED SENSOR FRONT

  1. C106108
    LH side:

    1. Disengage the 2 wire harness clamps for body.

    2. Disconnect the connector.

  1. C113672
    RH side:

    1. Disengage the clamp from the bracket.

    2. Disconnect the connector.

    3. Remove the bolt and the bracket from the body.

  1. C106109
    Remove the bolt, and separate the bracket from the upper arm.

  1. C106110
    Remove the 2 bolts and the front speed sensor from the steering knuckle.

← COMPONENTS (from Jan 2015)REMOVAL (from Jan 2015) →