DISASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1. REMOVE MAGNETIC CLUTCH ASSEMBLY |
Place the compressor and magnetic clutch in a vise.
Using SST, hold the magnet clutch hub.

Remove the bolt, magnet clutch hub and magnet clutch washer.
- HINT:
- There is no set number of magnet clutch washer since they are used for adjusting.
Using a snap ring expander, remove the snap ring and magnet clutch rotor.

- NOTICE:
- Take care not to damage the seal cover of the bearing when removing the snap ring.
Disconnect the connector.
Using a snap ring expander, remove the snap ring and magnet clutch stator.

