INSTALLATION
Removal / installation · Vehicles built Oct 2014 – Dec 2014
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Nov 2015 Dec 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017
| 1. INSTALL FRONT SUSPENSION TORQUE ARM |
Install the front suspension torque arm to the suspension upper arm with the 2 bolts.

- Torque:
- 81 N*m{ 826 kgf*cm , 60 ft.*lbf }
| 2. TEMPORARILY TIGHTEN TORSION BAR SPRING |
Check the right/left identification marks on the rear ends of the torsion bar springs.

- NOTICE:
- The end with an identification mark must be installed to the rear of the vehicle.
Wrap the splines on both ends of the torsion bar spring with protective tape.
Install the torsion dust cover to the torsion bar spring.
- NOTICE:
- Do not damage the lip of the dust cover when installing.
Remove the protective tape from the spline on both ends of the torsion bar spring and apply MP grease to them.

Align the matchmarks on the torsion bar spring and torque arm and engage the splines (for anchor arm side).

Text in Illustration *a
Anchor Arm Side
*b
Torque Arm Side
*c
Matchmarks
Align the matchmarks on the torsion bar spring and anchor arm and engage the splines (for torque arm side).
Install the following parts to the anchor arm in the following orders.

(A) Anchor arm swivel.
(B) Anchor arm adjusting hexagon bolt.
(C) Anchor arm adjusting seat.
(D) Anchor arm adjust nut.
Tighten the anchor arm adjust nut so that the protrusion length of the thread of the anchor arm adjusting hexagon bolt equals the length of dimension A in the table below.

- HINT:
- Australia:
Model
A mm (in.)
TRH201R-RBMDKQ
46.1 (1.81)
TRH201R-RBPDKQ
46.4 (1.83)
TRH221R-MBMDKQ
52.1 (2.05)
TRH221R-MBPDKQ
52.2 (2.06)
TRH223R-LEMDKQ
51.2 (2.02)
TRH223R-LEPDKQ
51.4 (2.02)
KDH201R-RBMDYQ
45.5 (1.79)
KDH201R-RBPDYQ
45.8 (1.80)
KDH221R-MBMDYQ
51.9 (2.04)
KDH221R-MBPDYQ
52.0 (2.05)
KDH223R-LEMDYQ
56.3 (2.22)
KDH223R-LEPDYQ
56.8 (2.24)
- South Africa:
Model
A mm (in.)
TRH201R-RBMDKN
48.5 (1.91)
TRH221R-MBMDKN
53.9 (2.12)
TRH221R-MSMDKN
53.3 (2.10)
TRH223R-LEMDKN
49.0 (1.93)
TRH213R-JDMNKN
54.6 (2.15)
TRH223R-LEMNKN
52.2 (2.06)
KDH200R-RBMDYN
46.3 (1.82)
KDH220R-MBMDYN
54.1 (2.13)
KDH220R-MSMDYN
53.5 (2.11)
KDH222R-LEMDYN
51.4 (2.02)
KDH212R-JDMNYN
58.5 (2.30)
KDH222R-LEMNYN
55.6 (2.19)
- New Zealand:
Model
A mm (in.)
TRH223R-LEMDKQ
52.3 (2.06)
KDH223R-LEMDYQ
57.5 (2.26)
TRH201R-SRMDK
48.0 (1.89)
TRH201R-SRPDK
48.4 (1.91)
KDH201R-SRMDY
48.0 (1.89)
KDH201R-SRPDY
48.2 (1.90)
KDH221R-MFMDY
54.1 (2.13)
KDH221R-MFPDY
54.1 (2.13)
KDH223R-LEPDYQ
57.8 (2.28)
- Thailand:
Model
A mm (in.)
KDH201R-RBMDYT
47.5 (1.87)
TRH213R-KDPNKT
46.0 (1.81)
KDH213R-KDPNYT
50.3 (1.98)
KDH203R-RDMNYT
48.5 (1.91)
KDH223R-LEMDYT
54.1 (2.13)
TRH223R-LEMDKT
51.4 (2.02)
KDH223R-LEPDYT
54.1 (2.13)
- Singapore:
Model
A mm (in.)
KDH221R-MBMDYQ
54.2 (2.13)
KDH221R-MBPDYQ
54.4 (2.14)
KDH223R-LEPDYQ
56.8 (2.24)
KDH201R-RBPDY
47.8 (1.88)
KDH201R-SBMDY
48.4 (1.91)
KDH203R-REMDY
48.9 (1.93)
- China:
Model
A mm (in.)
TRH213L-JDMNK
54.9 (2.16)
TRH223L-LEPNK
54.1 (2.13)
TRH223L-LDPNK
57.4 (2.26)
- The Philippines:
Model
A mm (in.)
KDH202L-REMDY
51.4 (2.02)
KDH212L-JDMNY
59.5 (2.34)
KDH212L-JDPNY
59.8 (2.35)
KDH212L-KDPNY
50.8 (2.00)
- G.C.C. Countries (*1):
Model
A mm (in.)
TRH201L-SBMDKV
48.1 (1.89)
TRH201L-SRMDKV
47.1 (1.85)
TRH221L-MBMDKV
54.0 (2.13)
TRH203L-REMDKV
50.4 (1.98)
TRH203L-REPDKV
50.5 (1.99)
TRH213L-JEMDKV
55.9 (2.20)
TRH213L-JEPDKV
56.2 (2.21)
TRH223L-LEMDKV
52.0 (2.05)
TRH223L-LEMDKV
(Rough Road Area Spec)
56.5 (2.22)
TRH223L-LEPDKV
52.0 (2.05)
TRH223L-LEPDKV
(Rough Road Area Spec)
56.5 (2.22)
TRH223L-LEMNKV
52.5 (2.07)
TRH223L-LEPNKV
52.6 (2.07)
KDH200L-SBMDYV
47.7 (1.88)
KDH202L-REMDYV
51.4 (2.02)
KDH212L-JEMDYV
60.6 (2.39)
KDH222L-LEMDYV
53.9 (2.12)
KDH222L-LEMDYV
(Rough Road Area Spec)
58.6 (2.31)
KDH222L-LEMNYV
54.2 (2.13)
- (*1):
- Saudi Arabia, Sultanate of Oman, Bahrain, United Arab Emirates, Qatar and Kuwait
- Russia:
Model
A mm (in.)
TRH223L-LEMNKX
52.0 (2.05)
KDH223L-LEMNYX
59.0 (2.32)
- Hong Kong:
Model
A mm (in.)
TRH200R-SSPDK
47.8 (1.88)
KDH201R-SSMDY
49.0 (1.93)
KDH201R-SSPDY
49.4 (1.94)
KDH201R-SSPNY
48.4 (1.91)
- Mexico:
Model
A mm (in.)
TRH221L-MBMDK
54.1 (2.13)
TRH221L-LFMDK
53.9 (2.12)
TRH223L-LEMNK
54.7 (2.15)
- Peru:
Model
A mm (in.)
KDH200L-SBMDY
47.7 (1.88)
LH200L-RBMDE
45.8 (1.80)
KDH202L-RDMDY
51.4 (2.02)
KDH212L-JDMNY
59.6 (2.35)
KDH222L-LEMDY
58.8 (2.31)
LH202L-REMDE
49.9 (1.96)
LH222L-LEMDE
58.3 (2.30)
- Chile:
Model
A mm (in.)
KDH201L-SBMDY
49.0 (1.93)
KDH203L-RDMDY
52.3 (2.06)
- Ecuador:
Model
A mm (in.)
LH200L-RBMDE
45.6 (1.80)
LH202L-REMDE
49.9 (1.96)
LH212L-JEMDE
59.0 (2.32)
LH222L-LEMDE
58.3 (2.30)
- Tunisia:
Model
A mm (in.)
KDH202L-RDMDY
48.0 (1.89)
- Malaysia:
Model
A mm (in.)
KDH200R-RBMDYE
45.1 (1.78)
TRH203R-EDMDKE
50.4 (1.98)
KDH202R-EDMDYE
49.9 (1.96)
- Vietnam:
Model
A mm (in.)
TRH223L-LEMDK
56.3 (2.22)
KDH222L-LEMDY
58.8 (2.31)
- Morocco:
Model
A mm (in.)
KDH201L-RBMDY
48.0 (1.89)
KDH223L-LEMDY
57.3 (2.26)
- Others:
Model
A mm (in.)
TRH201L-SBMDK
48.3 (1.90)
TRH221L-MBMDK
54.1 (2.13)
KDH200R-RBMDY
47.7 (1.88)
KDH200R-SBMDY
47.8 (1.88)
KDH200L-RBMDY
47.6 (1.87)
KDH200L-SBMDY
47.5 (1.87)
KDH220L-MBMDY
54.1 (2.13)
LH200R-RBMDE
46.2 (1.82)
LH200R-SBMDE
46.4 (1.83)
LH200L-RBMDE
46.2 (1.82)
TRH203R-REMDK
50.1 (1.97)
TRH203L-REMDK
50.6 (1.99)
TRH213R-JEMDK
56.0 (2.20)
TRH213L-JEMDK
56.0 (2.20)
TRH223R-LEMDK
51.7 (2.04)
TRH223R-LEMDK
(Rough Road Area Spec)
56.3 (2.22)
TRH223L-LEMDK
51.7 (2.04)
TRH223L-LEMDK
(Rough Road Area Spec)
56.3 (2.22)
TRH223L-LEMNK
52.3 (2.06)
TRH223L-LEMNK
(Rough Road Area Spec)
56.9 (2.24)
KDH202R-REMDY
52.0 (2.05)
KDH202L-REMDY
52.2 (2.06)
KDH202L-RDMDY
51.9 (2.04)
KDH212R-JEMDY
60.6 (2.39)
KDH212L-JEMDY
60.8 (2.39)
KDH222R-LEMDY
53.9 (2.12)
KDH222R-LEMDY
(Rough Road Area Spec)
58.6 (2.31)
KDH222R-LEPNY
54.0 (2.13)
KDH222R-LEPNY
(Rough Road Area Spec)
58.7 (2.31)
KDH222L-LEMDY
53.9 (2.12)
KDH222L-LEMDY
(Rough Road Area Spec)
58.6 (2.31)
KDH222L-LEPNY
54.0 (2.13)
KDH222L-LEPNY
(Rough Road Area Spec)
58.7 (2.31)
LH202R-REMDE
50.2 (1.98)
LH202L-REMDE
50.4 (1.98)
LH202L-RDMDE
50.4 (1.98)
LH212R-JEMDE
58.8 (2.31)
LH212L-JEMDE
59.0 (2.32)
LH222R-LEMDE
53.8 (2.12)
LH222R-LEMDE
(Rough Road Area Spec)
58.4 (2.30)
LH222L-LEMDE
53.8 (2.12)
LH222L-LEMDE
(Rough Road Area Spec)
58.4 (2.30)
| 3. INSTALL FENDER APRON MUDGUARD SEAL |
Install the fender apron mudguard seal with the 4 clips.

| 4. INSTALL FRONT WHEEL |
- Torque:
- 100 N*m{ 1020 kgf*cm , 74 ft.*lbf }
| 5. STABILIZE SUSPENSION |
| 6. FULLY TIGHTEN TORSION BAR SPRING |
Hold the anchor arm adjust nut and fully tighten the anchor lock nut.

Text in Illustration *1
Adjust Nut
*2
Lock Nut
- Torque:
- 78 N*m{ 795 kgf*cm , 58 ft.*lbf }
| 7. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT |
