2014-2019 Hiace · Service Manual SUSPENSION & AXLE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT TORSION BAR SPRING

  1. C101962E02
    Use V blocks and a dial indicator to check the runout of the torsion bar spring.

    Maximum:
    2.0 mm (0.079 in.)

    NOTICE:
    Set the dial indicator perpendicular to the middle of the torsion bar spring.

    If the value is not within the specified range, replace the torsion bar spring with a new one.

← REMOVAL (from Oct 2014)INSTALLATION (Oct 2014 – Dec 2014) →