2014-2019 Hiace · Service Manual SUSPENSION & AXLE

DISASSEMBLY

Removal / installation · Vehicles built from Oct 2014


1. REMOVE FRONT SUSPENSION UPPER ARM BUSHING

  1. C103222
    Use a hammer and chisel to unstake the lock nut.

  1. Remove the lock nut and retainer.

  1. G020164
    Use a hammer and chisel to diagonally bend 2 parts of the front suspension upper arm bushing flange.

  1. C113867E01
    Using SST and a press, remove the front suspension upper arm bushing (front side) from the front suspension upper arm.
    SST
    09950-00020  
    09527-20011  
    09649-17010  
    09710-22021   (09710-01061)

  1. Remove the lock nut (rear side), retainer and front suspension arm shaft from the front suspension upper arm.

  1. C102002E01
    Using SST and a press, remove the front suspension upper arm bushing (rear side) from the front suspension upper arm.
    SST
    09950-00020  
    09710-26011   (09710-05031)
    09950-60010   (09951-07360)

← REMOVAL (from Oct 2014)INSPECTION (from Oct 2014) →