2014-2019 Hiace · Service Manual SUSPENSION & AXLE

REASSEMBLY

Removal / installation · Vehicles built from Oct 2014


1. INSTALL FRONT SUSPENSION UPPER ARM BUSHING

  1. C102004E01
    Using SST and a press, press a new front suspension bushing (rear side) into the front suspension upper arm.
    SST
    09649-17010  
    09316-20011  

  1. Install the front suspension upper arm shaft to the front suspension upper arm.

  1. C113868E01
    Using SST and a press, press a new front suspension bushing (front side) into the front suspension upper arm.
    SST
    09527-21011  
    09726-27012   (09726-02101)
    09710-26011   (09710-05061)

  1. C102006E01
    Install the 2 retainers and 2 new lock nuts.

    HINT:
    Install the front suspension upper arm shaft as shown in the illustration.

    Torque:
    225 N*m{ 2,290 kgf*cm , 160 ft.*lbf }

  1. C103223
    Using a hammer and chisel, stake the 2 lock nuts.

← INSPECTION (from Oct 2014)INSTALLATION (Oct 2014 – Dec 2014) →