2014-2019 Hiace · Service Manual BODY ELECTRICAL

DISASSEMBLY

Removal / installation · Vehicles built from Oct 2014

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE NO. 1 HEADLIGHT BULB

E289537
  1. Turn the No. 1 headlight bulb in the direction indicated by the arrow to remove it.

    NOTICE:
    Do not touch the No. 1 headlight bulb glass.


2. REMOVE NO. 2 HEADLIGHT COVER LH

E289538
  1. Remove the No. 2 headlight cover LH from the headlight unit LH.


3. REMOVE FRONT TURN SIGNAL LIGHT SOCKET

E289544
  1. Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow to remove them as a unit.


4. REMOVE FRONT TURN SIGNAL LIGHT BULB

E289523
  1. Remove the front turn signal light bulb from the front turn signal light socket.


5. REMOVE CLEARANCE LIGHT BULB

E289539
  1. Turn the headlight cord with the clearance light bulb in the direction indicated by the arrow to disconnect them as a unit.

  1. E289541
    Remove the clearance light bulb from the headlight cord.


6. REMOVE HEADLIGHT LEVELING MOTOR LH

E289525
  1. Detach the claw and rotate the headlight leveling motor LH in the direction of the arrow shown in the illustration.

  1. E289527E01
    Turn the aiming screw of the headlight leveling motor LH in the direction of the arrow shown in the illustration and remove the headlight leveling motor LH.
    Text in Illustration 
    *1
    Aiming Screw


7. REMOVE HEADLIGHT LEVELING MOTOR BASE PACKING

E289529
  1. Remove the headlight leveling motor base packing from the headlight unit LH.


8. REMOVE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH

E289545
  1. Turn the headlight light control ECU sub-assembly LH in the direction indicated by the arrow to disconnect the headlight light control ECU sub-assembly LH.

  1. E289547
    Disconnect the connector and remove the headlight light control ECU sub-assembly LH.


9. REMOVE NO. 1 HEADLIGHT BACK COVER

E289548
  1. Remove the screw.

  1. Detach the guide and remove the No. 1 headlight back cover.


10. REMOVE HEADLIGHT GASKET

E289549
  1. Remove the headlight gasket from the No. 1 headlight back cover.


11. REMOVE HEADLIGHT CORD

E289550E01
  1. Disconnect the connector.

  1. Detach the 3 guides.

  1. Disconnect the grommet and remove the headlight cord.

    Text in Illustration 
    *1
    Grommet

← REMOVAL (from Jan 2017)ADJUSTMENT (Oct 2014 – Dec 2016) →