REMOVAL
Removal / installation · Vehicles built from Jan 2017
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. REMOVE FRONT BUMPER ASSEMBLY |
| 2. REMOVE HEADLIGHT ASSEMBLY LH |
![]() ![]() |
Put protective tape around the headlight assembly LH.
Text in Illustration *a
Guide
*b
Pin


Protective Tape
Remove the 2 screws.
Pull the headlight assembly LH to detach the guide and pin and remove it.
Disconnect each connector.

