REMOVAL
Removal / installation · Vehicles built from Oct 2014
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. REMOVE FRONT BUMPER COVER |
for Standard Body:
(Click here)
for Wide Body:
(Click here)
| 2. REMOVE FOG LIGHT MOUNTING BRACKET LH (for LH Side) |
![]() ![]() |
Detach the clamp.
Disconnect the connector and remove the 2 clips.
Text in Illustration *1
Connector
*2
Clip
Detach the 4 claws and remove the fog light mounting bracket LH with the fog light cover LH and fog light assembly LH.
| 3. REMOVE FOG LIGHT MOUNTING BRACKET RH (for RH Side) |
![]() ![]() |
Detach the 2 clamps.
Disconnect the connector and remove the 2 clips.
Text in Illustration *1
Connector
*2
Clip
Detach the 4 claws and remove the fog light mounting bracket RH with the fog light cover RH and fog light assembly RH.
| 4. REMOVE FOG LIGHT COVER LH |
![]() ![]() |
Detach the 3 claws and remove the fog light cover LH from the fog light mounting bracket LH.
| 5. REMOVE FOG LIGHT ASSEMBLY LH |
![]() ![]() |
Detach the 2 claws.
Detach the 2 guides and remove the fog light assembly LH from the fog light mounting bracket LH.





