INSTALLATION
Removal / installation · Vehicles built from Oct 2014
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH |
![]() ![]() |
Put protective tape around the rear combination light assembly LH.
Connect the connector.
Move the rear combination light assembly LH in the direction of the arrow in the illustration and attach the 2 pins to install the rear combination light assembly LH.
Text in Illustration *1
Protective Tape
*2
Pin
Install the 2 screws.


