2014-2019 Hiace · Service Manual BODY ELECTRICAL

REASSEMBLY

Removal / installation · Vehicles built from Jan 2017

Versions by build date: Oct 2014 – Dec 2016 from Jan 2017

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL REAR COMBINATION LIGHT PROTECTOR LH
  1. Install the rear combination light protector LH to the rear combination light lens LH.


2. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

E361319E01
  1. Attach the clamp and 2 guides to install the rear combination light socket and wire sub-assembly LH.

    Text in Illustration 
    *a
    Clamp
    *b
    Guide


3. INSTALL BACK UP LIGHT BULB (NO. 1 REAR FOG LIGHT BULB)

E289576
  1. Install the back up light bulb (No. 1 rear fog light bulb) to the rear combination light socket and wire sub-assembly LH.

  1. E289574
    Turn the rear combination light socket and wire sub-assembly LH with the back up light bulb (No. 1 rear fog light bulb) in the direction indicated by the arrow in the illustration to connect them as a unit.


4. INSTALL REAR TURN SIGNAL LIGHT BULB

E289572
  1. Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly LH.

  1. E361951
    Turn the rear combination light socket and wire sub-assembly LH with the rear turn signal light bulb in the direction indicated by the arrow in the illustration to connect them as a unit.


5. INSTALL TAIL AND STOP LIGHT BULB

E289568
  1. Install the tail and stop light bulb to the rear combination light socket and wire sub-assembly LH.

  1. E289566
    Turn the rear combination light socket and wire sub-assembly LH with the tail and stop light bulb in the direction indicated by the arrow in the illustration to connect them as a unit.


6. INSTALL REAR COMBINATION LIGHT BODY PACKING LH
  1. Install a new rear combination light body packing LH to the rear combination light lens LH.

← REASSEMBLY (Oct 2014 – Dec 2016)INSTALLATION (from Oct 2014) →