DISASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1. REMOVE REAR COMBINATION LIGHT BODY GASKET |
Remove the rear combination light body gasket.

- NOTICE:
- Be sure to remove all the traces of the old gasket from the body.
- Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.
- Be sure to remove all the traces of the old gasket from the body.
| 2. REMOVE REAR COMBINATION LIGHT BULB |
Turn in the direction indicated by the arrow, and remove the rear combination light socket and wire sub-assembly and the 3 rear combination light bulbs as a unit.

| 3. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY |
Remove the 3 rear combination light bulbs from the rear combination light socket and wire sub-assembly.
Disengage the claw, and remove the 2 clamps and rear combination light socket and wire sub-assembly.

