REASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY |
Engage the claw and install the rear combination light socket and wire sub-assembly with the 2 clamps.

| 2. INSTALL REAR COMBINATION LIGHT BULB |
Install the 3 rear combination light bulbs and the rear combination light socket and wire sub-assembly as a unit.
| 3. INSTALL REAR COMBINATION LIGHT BODY GASKET |
Align the gasket with the 7 pins and install a new rear combination light body gasket.

