2014-2019 Hiace · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Oct 2014


1. REMOVE WINDSHIELD WIPER ARM COVER
  1. Remove the 2 windshield wiper arm covers.


2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH
  1. Remove the nut and front wiper arm and blade assembly RH.


3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH
  1. Remove the nut and front wiper arm and blade assembly LH.


4. REMOVE COWL VENT COVER RH

  1. E108759
    Disengage the 2 claws and remove the cowl vent cover RH as shown in the illustration.


5. REMOVE COWL VENT COVER LH

  1. E108760
    Disengage the 2 claws and remove the cowl vent cover LH as shown in the illustration.


6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

  1. E108761E01
    Disconnect the washer hose at position <a> shown in the illustration.

  1. Body type narrow:

    1. Disengage the 10 claws, and remove the 6 clips and cowl top ventilator louver sub-assembly.

  1. Body type wide:

    1. Disengage the 11 claws, and remove the 7 clips and cowl top ventilator louver sub-assembly.


7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

  1. E108762E01
    Disconnect the connector.

  1. Remove the 2 bolts.

  1. Disengage the grommet and remove the windshield wiper motor and link assembly as shown in the illustration.


8. REMOVE FRONT WIPER MOTOR

  1. E108763E01
    Using a screwdriver wrapped with protective tape, separate the upper rod of the wiper link assembly from the front wiper motor as shown in the illustration.

  1. E108764E01
    Using a screwdriver wrapped with protective tape, separate the lower rod of the wiper link assembly from the front wiper motor as shown in the illustration.

  1. E108765
    Using a "torx" socket wrench (T30), remove the 2 bolts and front wiper motor.

← ON-VEHICLE INSPECTION (from Oct 2014)INSPECTION (from Oct 2014) →