INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT FRONT WIPER MOTOR (LHD) |
Apply battery voltage to the front wiper motor connector.

Check operation of the front wiper motor.
- OK:
Measurement condition
Specified condition
Battery positive (+) → Terminal 1 (+1)
Battery negative (-) → Terminal 5 (E)
Motor operates at low speed
Battery positive (+) → Terminal 4 (+2)
Battery negative (-) → Terminal 5 (E)
Motor operates at high speed
| INSPECT FRONT WIPER MOTOR (RHD) |
Apply battery voltage to the wiper motor connector.

Check operation of the front wiper motor.
- OK:
Measurement condition
Specified condition
Battery positive (+) → Terminal 5 (+1)
Battery negative (-) → Terminal 4 (E)
Motor operates at low speed
Battery positive (+) → Terminal 3 (+2)
Battery negative (-) → Terminal 4 (E)
Motor operates at high speed
