2014-2019 Hiace · Service Manual BODY

DISASSEMBLY

Removal / installation · Vehicles built from Oct 2014


1. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

  1. B318963
    Remove the hog rings.

  1. B318964
    Remove the hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.


2. REMOVE SEPARATE TYPE FRONT SEATBACK COVER

  1. B318965
    Remove the hog rings.

  1. B318966
    Remove the hog rings and separate type front seatback cover from the separate type front seatback pad.


3. REMOVE SEPARATE TYPE FRONT SEATBACK PAD
  1. Remove the separate type front seatback pad from the front seatback frame sub-assembly.


4. REMOVE RECLINING ADJUSTER RELEASE HANDLE

  1. B318967
    Using a screwdriver, disengage the claw and remove the reclining adjuster release handle.

    HINT:
    Tape the screwdriver tip before use.


5. REMOVE FRONT NO. 1 INNER SEAT CUSHION SHIELD

  1. B318968
    Remove the screw.

  1. Disengage the 8 claws and remove the front No. 1 inner seat cushion shield.


6. REMOVE FRONT INNER SEAT CUSHION SHIELD

  1. B318969
    Remove the screw.

  1. Disengage the 5 claws and remove the front inner seat cushion shield.


7. REMOVE RECLINING ADJUSTER INSIDE COVER LH

  1. B101695
    Remove the 2 screws and reclining adjuster inside cover LH.


8. REMOVE RECLINING ADJUSTER INSIDE COVER RH
  1. Remove the reclining adjuster inside cover RH from the front seatback frame sub-assembly.


9. REMOVE RECLINING ADJUSTER INSIDE COVER LH

  1. B319119
    Remove the 2 screws.

  1. Disengage the claw and remove the reclining adjuster inside cover LH.


10. REMOVE RECLINING ADJUSTER INSIDE COVER RH

HINT:
Use the same procedures for the RH and LH sides.


11. REMOVE FRONT SEATBACK CONTROL PANEL HOLE COVER

  1. B113591
    Using a screwdriver, disengage the 4 claws and remove the 2 front seatback control panel hole covers.

    HINT:
    Tape the screwdriver tip before use.


12. REMOVE FRONT SEAT SIDE TABLE

  1. B101699
    Remove the 4 screws.

  1. B319137
    Push the 2 center seat hinge spacers in the direction indicated by the arrow in the illustration and remove the front seat side table.


13. REMOVE REAR SEAT CENTER ARMREST SUPPORT

  1. B105518
    Remove the 2 center seat hinge spacers.

  1. Remove the 2 screws and 2 rear seat center armrest supports.


14. REMOVE CONSOLE BOX ASSEMBLY

  1. B101700
    Using a screwdriver, remove the 2 caps.

    HINT:
    Tape the screwdriver tip before use.

  1. B113592
    Remove the 2 screws.

  1. Disengage the 2 claws and remove the console box assembly.


15. REMOVE RECLINING ADJUSTER RELEASE HANDLE

  1. B101702
    Remove the screw and reclining adjuster release handle.


16. REMOVE CENTER SEAT HINGE COVER LH

  1. B113593
    Remove the 2 screws.

  1. Disengage the 5 claws and remove the center seat hinge cover LH.


17. REMOVE CENTER SEAT HINGE COVER RH

  1. B113594
    Remove the screw.

  1. Disengage the claw and remove the center seat hinge cover RH.


18. REMOVE CENTER SEAT UPPER HINGE COVER

  1. Disengage the claw and remove the center seat upper hinge cover.

    B319120E01

    Text in Illustration 
    *A
    for Standard Body
    *B
    for Wide Body


19. REMOVE FRONT SEAT CUSHION COVER SET PLATE

  1. B115235
    Remove the bolt, bush and front seat cushion cover set plate.


20. REMOVE RECLINING SEATBACK ADJUSTER ASSEMBLY

  1. B318974
    Remove the hog rings and front center seatback cover.

  1. B101707
    Using a "TORX" socket T50, remove the 2 "TORX" bolts and reclining seatback adjuster assembly.


21. REMOVE FRONT CENTER SEATBACK COVER
  1. Remove the front center seatback cover from the center seatback pad.

← REMOVAL (from Oct 2014)REASSEMBLY (from Oct 2014) →