REASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1.
SET FRONT CENTER SEATBACK COVER |
 |
Set the front center seatback cover to the center seatback pad.
| 2.
INSTALL RECLINING SEATBACK ADJUSTER ASSEMBLY |
 |
- Using a "TORX" socket T50, install the reclining seatback adjuster assembly with the 2 "TORX" bolts.
-
Torque:
- 41 N*m{
418 kgf*cm
, 30 ft.*lbf
}
- Using hog ring pliers, install the front center seatback cover to the center seatback pad with new hog rings.
Text in Illustration
*1
|
Hog Ring Pliers
|
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
| 3.
INSTALL FRONT SEAT CUSHION COVER SET PLATE |
 |
- Install the front seat cushion cover set plate with the bolt and bush.
-
Torque:
- 16 N*m{
163 kgf*cm
, 12 ft.*lbf
}
| 4.
INSTALL CENTER SEAT UPPER HINGE COVER |
 |
Engage the claw to install the center seat upper hinge cover.


Text in Illustration
*A
|
for Standard Body
|
*B
|
for Wide Body
|
| 5.
INSTALL CENTER SEAT HINGE COVER RH |
 |
Engage the claw to install the center seat hinge cover RH with the screw.
| 6.
INSTALL CENTER SEAT HINGE COVER LH |
 |
Engage the 5 claws to install the center seat hinge cover LH with the 2 screws.
| 7.
INSTALL RECLINING ADJUSTER RELEASE HANDLE |
 |
Install the reclining adjuster release handle with the screw.
| 8.
INSTALL CONSOLE BOX ASSEMBLY |
 |
Engage the 2 claws to install the console box assembly with the 2 screws.
Install the 2 caps to the console box assembly.
| 9.
INSTALL REAR SEAT CENTER ARMREST SUPPORT |
 |
Install 2 rear seat center armrest supports with the 2 screws.
Install the 2 center seat hinge spacers.
| 10.
INSTALL FRONT SEAT SIDE TABLE |
 |
- Push the 2 center seat hinge spacers in the direction indicated by the arrow in the illustration.
Install the front seat side table with the 4 screws.
| 11.
INSTALL FRONT SEATBACK CONTROL PANEL HOLE COVER |
 |
Engage the 4 claws to install the 2 front seatback control panel hole covers.
| 12.
INSTALL RECLINING ADJUSTER INSIDE COVER LH |
 |
Engage the claw and install the reclining adjuster inside cover LH with the 2 screws.
| 13.
INSTALL RECLINING ADJUSTER INSIDE COVER RH |
 |
- HINT:
- Use the same procedures for the RH and LH sides.
| 14.
INSTALL RECLINING ADJUSTER INSIDE COVER LH |
 |
Install the reclining adjuster inside cover LH with the 2 screws.
| 15.
INSTALL RECLINING ADJUSTER INSIDE COVER RH |
 |
Install the reclining adjuster inside cover RH to the front seatback frame sub-assembly.
| 16.
INSTALL FRONT INNER SEAT CUSHION SHIELD |
 |
Engage the 5 claws to install the front inner seat cushion shield with the screw.
| 17.
INSTALL FRONT NO. 1 INNER SEAT CUSHION SHIELD |
 |
Engage the 8 claws to install the front No. 1 inner seat cushion shield with the screw.
| 18.
INSTALL RECLINING ADJUSTER RELEASE HANDLE |
 |
Engage the claw to install the reclining adjuster release handle.
| 19.
INSTALL SEPARATE TYPE FRONT SEATBACK PAD |
 |
Install the separate type front seatback pad to the front seatback frame sub-assembly.
| 20.
INSTALL SEPARATE TYPE FRONT SEATBACK COVER |
 |
- Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with new hog rings.
Text in Illustration
*1
|
Hog Ring Pliers
|
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
- Using hog ring pliers, install new hog rings.
Text in Illustration
*1
|
Hog Ring Pliers
|
- NOTICE:
- Be careful not to damage the cover.
| 21.
INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER |
 |
- Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with new hog rings.
Text in Illustration
*1
|
Hog Ring Pliers
|
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
- Using hog ring pliers, install new hog rings.
Text in Illustration
*1
|
Hog Ring Pliers
|
- NOTICE:
- Be careful not to damage the cover.