REMOVAL
Removal / installation · Vehicles built Jan 2015 – Mar 2016
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1.
REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO. 2
|
 |
- Using a moulding remover D, detach the 3 claws and remove the instrument cluster finish panel garnish No. 2.
| 2.
REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER
|
 |
for Standard Body:
Using a moulding remover D, detach the 4 claws in the order shown in the illustration.
for Wide Body:
Using a moulding remover D, detach the 5 claws in the order shown in the illustration.


Text in Illustration
*A
|
for Standard Body
|
*B
|
for Wide Body
|
- Apply protective tape as shown in the illustration.
Text in Illustration
*1
|
Protective Tape
|
Using a moulding remover D, detach the claw.
- Detach the claw as shown in the illustration.
- Detach the 3 claws as shown in the illustration.
- Detach the 2 claws as shown in the illustration.
for Standard Body:
Detach the 3 claws and remove the instrument cluster finish panel sub-assembly center.
for Wide Body:
Detach the 4 claws and remove the instrument cluster finish panel sub-assembly center.


Text in Illustration
*A
|
for Standard Body
|
*B
|
for Wide Body
|
| 3.
REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO. 1
|
 |
- Using a moulding remover D, detach the 3 claws and remove the instrument cluster finish panel garnish No. 1.
| 4.
REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
|
 |
- Using a moulding remover D, detach the 4 claws and remove the instrument cluster finish panel assembly.
| 5.
REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
|
 |
- Detach the 6 claws and 4 hooks and remove the instrument cluster finish panel sub-assembly.
| 6.
REMOVE COMBINATION METER ASSEMBLY |
 |
- Remove the 2 screws.
- Detach the 2 claws and remove the combination meter assembly.
Disconnect the 2 connectors and detach the wire harness clamp.