REASSEMBLY
Removal / installation · Vehicles built Oct 2014 – Dec 2016
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| 1.
INSTALL NO. 2 SEAT BACK COVER SUB-ASSEMBLY |
 |
- Using hog ring pliers, install the No. 2 seat back cover sub-assembly to the No. 2 seat back pad with 4 new hog rings.
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
- Close the fastener of the No. 2 seat back cover sub-assembly.
| 2.
INSTALL ASSIST GRIP ASSEMBLY (w/ Assist Grip) |
|
| 3.
INSTALL ASSIST GRIP PLUG (w/ Assist Grip) |
|
| 4.
INSTALL NO. 2 SEAT LEG SUB-ASSEMBLY |
 |
- Install the No. 2 seat leg sub-assembly with the 4 bolts.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 5.
INSTALL REAR SEAT CENTER BELT ASSEMBLY INNER (w/ Seat Belt)
|
 |
- Install the rear seat center belt assembly inner with the bolt.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 6.
INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY |
 |
- Using hog ring pliers, install the No. 2 seat cushion cover sub-assembly to the No. 2 seat cushion pad with 12 new hog rings.
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
- w/o Seat belt:
Using hog ring pliers, install the 2 new hog rings.
- NOTICE:
- Be careful not to damage the cover.
- w/ Seat belt:
Using hog ring pliers, install the 4 new hog rings.
- NOTICE:
- Be careful not to damage the cover.
| 7.
INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD |
|
| 8.
INSTALL SEAT LAP TYPE BELT ASSEMBLY NO. 1 (w/ Seat Belt)
|
 |
- Install the seat lap type belt assembly No.1 with the bolt.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 9.
INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)
|
 |
- Install the rear seat belt assembly inner with the bolt.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 10.
INSTALL REAR SEAT LEG SIDE COVER |
 |
- Install the rear seat leg side cover.
| 11.
INSTALL REAR SEAT FRONT BRACKET COVER |
 |
- Install the rear seat front bracket cover.
| 12.
INSTALL RECLINING ADJUSTER COVER LH |
 |
- Install the reclining adjuster cover LH with the 2 screws.
| 13.
INSTALL RECLINING ADJUSTER COVER RH |
 |
- Install the reclining adjuster cover RH with the 2 screws.
| 14.
INSTALL SUB SEAT CUSHION PAD (w/ Sub Seat) |
 |
- Install the sub seat cushion pad on the sub seat cushion cover sub-assembly.
| 15.
INSTALL SUB SEAT CUSHION BOARD (w/ Sub Seat) |
 |
- Install the sub seat cushion board with the 3 screws.
| 16.
INSTALL SUB SEAT CUSHION FRAME SUB-ASSEMBLY (w/ Sub Seat) |
 |
- Install the sub seat cushion frame sub-assembly and close the fastener of the sub seat cushion cover sub-assembly.
Engage the hook and loop fastener.
| 17.
INSTALL SUB SEAT CUSHION FRAME CUSHION (w/ Sub Seat) |
 |
- Install the sub seat cushion frame cushion with the screw.
| 18.
INSTALL SUB SEAT CUSHION BRACKET SUB-ASSEMBLY (w/ Sub Seat) |
 |
- Install the sub seat cushion bracket sub-assembly and 2 wave washers with the 2 bolts.
-
Torque:
- 12 N*m{
122 kgf*cm
, 9 ft.*lbf
}
| 19.
INSTALL SUB SEAT LINK SPRING (w/ Sub Seat) |
 |
- Install the 2 sub seat link springs, the 4 wave washers, the 4 plate washers, and the 4 E rings.
| 20.
INSTALL NO. 1 SUB SEAT CUSHION BOARD PLATE (w/ Sub Seat) |
 |
- Install the No. 1 sub seat cushion board plate with the 4 bolts.
-
Torque:
- 29 N*m{
296 kgf*cm
, 21 ft.*lbf
}
Engage the hook and install the rear seat cover cap.
| 21.
INSTALL SUB SEAT CUSHION FRAME CUSHION (w/ Sub Seat) |
 |
- Install the sub seat cushion frame cushion with the screw.
| 22.
INSTALL SUB SEAT LEG SUB-ASSEMBLY (w/ Sub Seat) |
 |
- Install the sub seat leg sub assembly, the 2 wave washers, the 2 rear seat hinge pins, and the 2 E rings.
| 23.
INSTALL REAR SEAT HINGE COVER (w/ Sub Seat) |
 |
- Install the 2 rear seat hinge covers with the 2 screws.
| 24.
INSTALL NO. 1 SUB SEAT LINK ARM (w/ Sub Seat) |
 |
- Install the No. 1 sub seat link arm and 2 wave washers with the 2 nuts.
-
Torque:
- 19 N*m{
195 kgf*cm
, 14 ft.*lbf
}
| 25.
INSTALL SUB SEAT BACK FRAME SUB-ASSEMBLY (w/ Sub Seat) |
 |
- Install the sub seat back frame on the sub seat back pad.
| 26.
INSTALL SUB SEAT BACK COVER SUB-ASSEMBLY (w/ Sub Seat) |
 |
- Install the sub seat back cover sub-assembly and engage the 2 hook and loop fasteners.
Close the fastener of the sub seat back cover sub-assembly.
| 27.
INSTALL SUB SEAT BACK ASSEMBLY (w/ Sub Seat) |
 |
- Install the sub seat back assembly and 2 wave washers with the 2 bolts.
-
Torque:
- 19 N*m{
195 kgf*cm
, 14 ft.*lbf
}