2014-2019 Hiace · Service Manual BODY

REASSEMBLY

Removal / installation · Vehicles built from Jan 2017

Versions by build date: Oct 2014 – Dec 2016 from Jan 2017


1. INSTALL NO. 2 SEAT BACK COVER SUB-ASSEMBLY

  1. B181449E03
    Using hog ring pliers, install the No. 2 seat back cover sub-assembly to the No. 2 seat back pad with 4 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

  1. B107598
    Close the fastener of the No. 2 seat back cover sub-assembly.


2. INSTALL ASSIST GRIP ASSEMBLY (w/ Assist Grip)

3. INSTALL ASSIST GRIP PLUG (w/ Assist Grip)

4. INSTALL NO. 2 SEAT LEG SUB-ASSEMBLY

  1. B107595
    Install the No. 2 seat leg sub-assembly with the 4 bolts.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


5. INSTALL REAR SEAT CENTER BELT ASSEMBLY INNER (w/ Seat Belt)

  1. B107683
    Install the rear seat center belt assembly inner with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


6. INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY

  1. B181450E02
    Using hog ring pliers, install the No. 2 seat cushion cover sub-assembly to the No. 2 seat cushion pad with 12 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

  1. B181451E02
    w/o Seat belt:

    1. Using hog ring pliers, install the 2 new hog rings.

      NOTICE:
      Be careful not to damage the cover.

  1. B181452E02
    w/ Seat belt:

    1. Using hog ring pliers, install the 4 new hog rings.

      NOTICE:
      Be careful not to damage the cover.


7. INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD

8. INSTALL SEAT LAP TYPE BELT ASSEMBLY NO. 1 (w/ Seat Belt)

  1. B107681
    Install the seat lap type belt assembly No.1 with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


9. INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)

  1. B107678
    Install the rear seat belt assembly inner with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


10. INSTALL REAR SEAT LEG SIDE COVER

  1. B107591
    Install the rear seat leg side cover.


11. INSTALL REAR SEAT FRONT BRACKET COVER

  1. B107590
    Install the rear seat front bracket cover.


12. INSTALL RECLINING ADJUSTER COVER LH

  1. B107589
    Install the reclining adjuster cover LH with the 2 screws.


13. INSTALL RECLINING ADJUSTER COVER RH

  1. B107588
    Install the reclining adjuster cover RH with the 2 screws.


14. INSTALL SUB SEAT CUSHION PAD (w/ Sub Seat)

  1. B181466
    Install the sub seat cushion pad on the sub seat cushion cover sub-assembly.


15. INSTALL SUB SEAT CUSHION BOARD (w/ Sub Seat)

  1. B183853
    Install the sub seat cushion board with the 3 screws.


16. INSTALL SUB SEAT CUSHION FRAME SUB-ASSEMBLY (w/ Sub Seat)

  1. B181465
    Install the sub seat cushion frame sub-assembly and close the fastener of the sub seat cushion cover sub-assembly.

  1. Engage the hook and loop fastener.


17. INSTALL SUB SEAT CUSHION FRAME CUSHION (w/ Sub Seat)

  1. B181464
    Install the sub seat cushion frame cushion with the screw.


18. INSTALL SUB SEAT CUSHION BRACKET SUB-ASSEMBLY (w/ Sub Seat)

  1. B181463
    Install the sub seat cushion bracket sub-assembly and 2 wave washers with the 2 bolts.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }


19. INSTALL SUB SEAT LINK SPRING (w/ Sub Seat)

  1. B181462
    Install the 2 sub seat link springs, the 4 wave washers, the 4 plate washers, and the 4 E rings.


20. INSTALL NO. 1 SUB SEAT CUSHION BOARD PLATE (w/ Sub Seat)

  1. B181461
    Install the No. 1 sub seat cushion board plate with the 4 bolts.

    Torque:
    29 N*m{ 296 kgf*cm , 21 ft.*lbf }

  1. Engage the hook and install the rear seat cover cap.


21. INSTALL SUB SEAT CUSHION FRAME CUSHION (w/ Sub Seat)

  1. B181460
    Install the sub seat cushion frame cushion with the screw.


22. INSTALL SUB SEAT LEG SUB-ASSEMBLY (w/ Sub Seat)

  1. B181459
    Install the sub seat leg sub assembly, the 2 wave washers, the 2 rear seat hinge pins, and the 2 E rings.


23. INSTALL REAR SEAT HINGE COVER (w/ Sub Seat)

  1. B181458
    Install the 2 rear seat hinge covers with the 2 screws.


24. INSTALL NO. 1 SUB SEAT LINK ARM (w/ Sub Seat)

  1. B181457
    Install the No. 1 sub seat link arm and 2 wave washers with the 2 nuts.

    Torque:
    19 N*m{ 195 kgf*cm , 14 ft.*lbf }


25. INSTALL SUB SEAT BACK FRAME SUB-ASSEMBLY (w/ Sub Seat)

  1. B181456
    Install the sub seat back frame on the sub seat back pad.


26. INSTALL SUB SEAT BACK COVER SUB-ASSEMBLY (w/ Sub Seat)

  1. B181455
    Install the sub seat back cover sub-assembly and engage the 2 hook and loop fasteners.

  1. Close the fastener of the sub seat back cover sub-assembly.


27. INSTALL SUB SEAT BACK ASSEMBLY (w/ Sub Seat)

  1. B181454
    Install the sub seat back assembly and 2 wave washers with the 2 bolts.

    Torque:
    19 N*m{ 195 kgf*cm , 14 ft.*lbf }

← REASSEMBLY (Oct 2014 – Dec 2016)INSTALLATION (from Oct 2014) →