DISASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1.
REMOVE AIR INLET CONTROL CABLE |
 |
- Release the 3 claws and remove the air inlet control cable.
| 2.
REMOVE AIR DUCT SUB-ASSEMBLY |
 |
- Release the 2 claws and remove the air duct sub-assembly.
| 3.
REMOVE AIR FILTER CASE |
 |
- Disengage the 2 claws and remove the air filter case.
| 4.
REMOVE CLEAN AIR FILTER |
 |
- Remove the clean air filter from the blower unit.
| 5.
REMOVE BLOWER RESISTOR |
 |
- Remove the 2 screws and blower resistor.
| 6.
REMOVE FRONT BLOWER MOTOR ASSEMBLY |
 |
- Remove the 3 screws and front blower motor assembly.