REASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1.
INSTALL FRONT BLOWER MOTOR ASSEMBLY |
 |
- Install the front blower motor assembly with the 3 screws.
| 2.
INSTALL BLOWER RESISTOR |
 |
- Install the blower resistor with the 2 screws.
| 3.
INSTALL CLEAN AIR FILTER |
 |
- Install the clean air filter into the blower unit.
- NOTICE:
- Install the clean air filter with its UP marks oriented in the correct direction.
| 4.
INSTALL AIR FILTER CASE |
 |
- Engage the 2 claws to install the air filter case.
| 5.
INSTALL AIR DUCT SUB-ASSEMBLY |
 |
- Engage the 2 claws to install the air duct sub-assembly.
| 6.
INSTALL AIR INLET CONTROL CABLE |
 |
- Engage the 3 claws to install the air inlet control cable.