Detach the 4 clips and remove the instrument panel finish lower.
Disconnect each connector.
Push the positions indicated by the arrows in the illustration to disconnect the fuel lid lock control cable and bonnet (hood) control cable assembly from the instrument panel finish lower.
2.
REMOVE INSTRUMENT PANEL NO. 1 UNDER COVER SUB-ASSEMBLY
Using a clip remover, remove the 2 clips
Detach the 3 claws and remove the instrument panel under cover sub-assembly No. 1.
3.
REMOVE PARKING BRAKE HOLE COVER
Detach the 6 claws and remove the parking brake hole cover.
Disconnect each connector.
4.
REMOVE SHIFT LEVER KNOB
Turn the shift lever knob in the direction indicated by the arrow and remove it.
Text in Illustration
*A
for Manual Transmission
*B
for Automatic Transmission
5.
REMOVE SHIFTING HOLE COVER ASSEMBLY
for Manual Transmission: Detach the 6 claws and remove the shifting hole cover assembly.
Text in Illustration
*A
for Manual Transmission
*B
for Automatic Transmission
for Automatic Transmission: Detach the 8 claws and remove the shifting hole cover assembly.
6.
REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER
Detach the 8 claws and remove the instrument panel finish panel lower center.
Text in Illustration
*A
for Manual Transmission
*B
for Automatic Transmission
7.
REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER (AIR CONDITIONING CONTROL ASSEMBLY)
Put protective tape around the instrument cluster finish panel sub-assembly lower center.
Text in Illustration
*1
Protective Tape
Detach the 8 claws and separate the instrument cluster finish panel sub-assembly lower center (air conditioning control assembly).
Disconnect the connector.
Disconnect the cable from the clamp.
Detach the 2 claws and disconnect the air inlet damper control cable sub-assembly from the No. 2 heater control knob.
Detach the 2 claws and disconnect the heater control cable sub-assembly from the heater control knob.
w/ No. 3 Heater Control Knob: Detach the 2 claws and disconnect the air mix damper control cable sub-assembly from the No. 3 heater control knob and remove the instrument cluster finish panel sub-assembly lower center (air conditioning control assembly).