2014-2019 Hiace · Service Manual HEATER & AIR CONDITIONING SYSTEM

REMOVAL

Removal / installation · Vehicles built from Jan 2017

Versions by build date: Oct 2014 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER

  1. B365544
    Using a clip remover, remove the 2 clips.

  1. Detach the 4 clips and remove the instrument panel finish lower.

  1. Disconnect each connector.

  1. B102838
    Push the positions indicated by the arrows in the illustration to disconnect the fuel lid lock control cable and bonnet (hood) control cable assembly from the instrument panel finish lower.


2. REMOVE INSTRUMENT PANEL NO. 1 UNDER COVER SUB-ASSEMBLY

  1. B365546
    Using a clip remover, remove the 2 clips

  1. Detach the 3 claws and remove the instrument panel under cover sub-assembly No. 1.


3. REMOVE PARKING BRAKE HOLE COVER

  1. B365547
    Detach the 6 claws and remove the parking brake hole cover.

  1. Disconnect each connector.


4. REMOVE SHIFT LEVER KNOB

  1. B365548E01
    Turn the shift lever knob in the direction indicated by the arrow and remove it.
    Text in Illustration 
    *A
    for Manual Transmission
    *B
    for Automatic Transmission


5. REMOVE SHIFTING HOLE COVER ASSEMBLY

  1. B365550E01
    for Manual Transmission:
    Detach the 6 claws and remove the shifting hole cover assembly.
    Text in Illustration 
    *A
    for Manual Transmission
    *B
    for Automatic Transmission

  1. for Automatic Transmission:
    Detach the 8 claws and remove the shifting hole cover assembly.


6. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER

  1. B365551E01
    Detach the 8 claws and remove the instrument panel finish panel lower center.
    Text in Illustration 
    *A
    for Manual Transmission
    *B
    for Automatic Transmission


7. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER (AIR CONDITIONING CONTROL ASSEMBLY)

  1. E289345E01
    Put protective tape around the instrument cluster finish panel sub-assembly lower center.
    Text in Illustration 
    *1
    Protective Tape

  1. Detach the 8 claws and separate the instrument cluster finish panel sub-assembly lower center (air conditioning control assembly).

  1. Disconnect the connector.

  1. E289347
    Disconnect the cable from the clamp.

  1. Detach the 2 claws and disconnect the air inlet damper control cable sub-assembly from the No. 2 heater control knob.

  1. E289346
    Detach the 2 claws and disconnect the heater control cable sub-assembly from the heater control knob.

  1. E289358
    w/ No. 3 Heater Control Knob:
    Detach the 2 claws and disconnect the air mix damper control cable sub-assembly from the No. 3 heater control knob and remove the instrument cluster finish panel sub-assembly lower center (air conditioning control assembly).

← REMOVAL (Apr 2016 – Dec 2016)DISASSEMBLY (from Oct 2014) →