DISASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1. REMOVE COOLER WIRING HARNESS SUB-ASSEMBLY |
Remove the 4 clamps and 4 connectors, and cooler wiring harness sub-assembly.

| 2. REMOVE REAR COOLER BLOWER RESISTOR |
Remove the 2 screws and rear cooler blower resistor.

| 3. REMOVE COOLING UNIT CASE SUB-ASSEMBLY |
Remove the 18 screws and cooling unit case sub-assembly.

| 4. REMOVE COOLER NO.2 THERMISTOR |
Remove the cooler No.2 thermistor.

| 5. REMOVE EVAPORATOR SUB-ASSEMBLY (REAR) |
Remove the screw and clamp.

Remove the evaporator sub-assembly (rear).
| 6. REMOVE BLOWER (REAR) FAN SUB-ASSEMBLY |
Remove the 2 nuts and 2 blower (rear) fan sub-assemblys.

| 7. REMOVE BLOWER MOTOR ASSEMBLY |
Remove the 2 plate washers.

Remove the 2 screws and 2 blower motor assembly.
