2014-2019 Hiace · Service Manual HEATER & AIR CONDITIONING SYSTEM

REASSEMBLY

Removal / installation · Vehicles built from Oct 2014


1. INSTALL BLOWER MOTOR ASSEMBLY

  1. E104220
    Install the 2 blower motor assemblys with the 2 screws.

    Torque:
    0.69 N*m{ 7.0 kgf*cm , 6 in.*lbf }

  1. Install the plate washer.


2. INSTALL BLOWER (REAR) FAN SUB-ASSEMBLY

  1. E104219
    Install the 2 blower (rear) fan sub-assembly with the 2 nuts.

    Torque:
    2.9 N*m{ 30 kgf*cm , 26 in.*lbf }


3. INSTALL EVAPORATOR SUB-ASSEMBLY (REAR)

  1. E104218
    Install the evaporator sub-assembly.

  1. Install the clamp with the screw.


4. INSTALL COOLER NO.2 THERMISTOR

  1. E104217
    Install the cooler No.2 thermistor.


5. INSTALL COOLING UNIT CASE SUB-ASSEMBLY

  1. E104216
    Install the unit case sub-assembly with the 18 screws.


6. INSTALL BLOWER RESISTOR

  1. E104215
    Install the cooler blower resistor with the 2 screws.


7. INSTALL COOLER WIRING HARNESS SUB-ASSEMBLY

  1. E108965E02
    Engage the 4 clamps and 4 connectors to install the cooler wiring harness sub-assembly.

← DISASSEMBLY (from Oct 2014)INSTALLATION (Oct 2014 – Mar 2016) →