DISASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1.
REMOVE COOLER WIRING HARNESS SUB-ASSEMBLY |
 |
- Remove the 6 clamps, 4 connectors, and cooler wiring harness sub-assembly.
| 2.
REMOVE REAR COOLER BLOWER RESISTOR |
 |
- Remove the 2 screws and rear cooler blower resistor.
| 3.
REMOVE COOLING UNIT CASE SUB-ASSEMBLY |
 |
- Remove the 18 screws and cooling unit case sub-assembly.
| 4.
REMOVE COOLER NO. 2 THERMISTOR |
 |
- Disengage the clamp and remove the cooler No. 2 thermistor.
| 5.
REMOVE EVAPORATOR SUB-ASSEMBLY (REAR) |
 |
- Remove the screw and clamp.
Remove the evaporator sub-assembly (rear).
| 6.
REMOVE REAR BLOWER FAN MOTOR ASSEMBLY |
 |
- Remove the 3 screws and the blower fan motor assembly.
- HINT:
- Use the same procedure as for the opposite side.
- Removing the cooling unit case enables removal of the blower fan RR without disassembling the cooling unit assembly RR.
| 7.
REMOVE COOLING UNIT CASE SUB-ASSEMBLY |
 |
- Remove the 3 screws and the cooling unit case.