REASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1. INSTALL COOLING UNIT CASE SUB-ASSEMBLY |
Install the cooling unit case with the 3 screws.

| 2. INSTALL REAR BLOWER FAN MOTOR ASSEMBLY |
Install the blower fan motor assembly with the 3 screws.

- HINT:
- Use the same procedure as for the opposite side.
| 3. INSTALL EVAPORATOR SUB-ASSEMBLY (REAR) |
Install the evaporator sub-assembly.

Install the clamp with the screw.
| 4. INSTALL COOLER NO. 2 THERMISTOR |
Install the cooler No. 2 thermistor.

Engage the clamp.
| 5. INSTALL COOLING UNIT CASE SUB-ASSEMBLY |
Install the unit case sub-assembly with the 18 screws.

| 6. INSTALL REAR COOLER BLOWER RESISTOR |
Install the cooler blower resistor with the 2 screws.

| 7. INSTALL COOLER WIRING HARNESS SUB-ASSEMBLY |
Engage the 6 clamps and 4 connectors to install the cooler wiring harness sub-assembly.

