INSTALLATION
Removal / installation · Vehicles built from Jan 2017
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| 1. INSTALL DOOR ELECTRICAL KEY SWITCH COVER (w/ Smart Entry and Start System) |
Install the door electrical key switch cover.
| 2. INSTALL LICENSE PLATE LIGHT ASSEMBLY |
w/ Smart Entry and Start System:
(Click here)
w/o Smart Entry and Start System:
(Click here)
| 3. INSTALL BACK DOOR OUTSIDE GARNISH |
Install the grommet.

Attach the 2 clips to install the back door outside garnish.
Install the 5 nuts.
w/ Smart Entry and Start System:
Connect the 2 connectors.
w/o Smart Entry and Start System:
Connect the connector.
| 4. INSTALL BACK DOOR TRIM BOARD (for Board) |
Install the back door trim board with the 16 clips.

| 5. INSTALL BACK DOOR TRIM BOARD (for Molded Door Trim) |
Attach the 18 clips to install the back door trim board.

Install the 2 screws.
| 6. INSTALL BACK DOOR PULL STRAP (w/ Strap) |
Install the back door pull strap with the screw.

| 7. INSTALL BACK DOOR INSIDE HANDLE BEZEL (w/ Back Door Inside Handle) |
![]() ![]() |
w/o Illumination:
Install the back door inside handle bezel with the 2 screws.
w/ Illumination:
Connect the connector.
Install the back door inside handle bezel with the 2 screws.
Text in Illustration *A
w/o Illumination:
*B
w/ Illumination:
| 8. INSTALL BACK DOOR INSIDE HANDLE ASSEMBLY (w/ Back Door Inside Handle) |
Install the back door inside handle assembly with the screw.


