2014-2019 Hiace · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Jan 2017

Versions by build date: Oct 2014 – Dec 2016 from Jan 2017


1. REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY (w/ Back Door Inside Handle)
  1. Disconnect the link.

  1. Remove the 3 screws and the back door inside handle assembly.

    B106842E02

    Text in Illustration 
    *A
    w/o Power Door Lock
    *B
    w/ Power Door Lock


2. REMOVE BACK DOOR INSIDE HANDLE BEZEL (w/ Back Door Inside Handle)

B389406E02
  1. w/o Illumination:

    1. Remove the 2 screws and the back door inside handle bezel.

  1. w/ Illumination:

    1. Remove the 2 screws and the back door inside handle bezel.

    2. Disconnect the connector.

      Text in Illustration 
      *A
      w/o Illumination
      *B
      w/ Illumination


3. REMOVE BACK DOOR PULL STRAP (w/ Strap)

  1. B101150
    Remove the screw and back door pull strap.


4. REMOVE BACK DOOR TRIM BOARD (for Board)

  1. B101151
    Using a clip remover, remove the 16 clips and the back door trim board.


5. REMOVE BACK DOOR TRIM BOARD (for Molded Door Trim)

  1. B366846
    Remove the 2 screws.

  1. Using a clip remover, remove the 18 clips and the back door trim board.


6. REMOVE BACK DOOR OUTSIDE GARNISH
  1. w/ Smart Entry and Start System:

    1. Disconnect the 2 connectors.

  1. w/o Smart Entry and Start System:

    1. Disconnect the connector.

  1. B361952
    Remove the 5 nuts.

  1. Detach the 2 clips and remove the back door outside garnish.

  1. B103905
    Remove the grommet.


7. REMOVE LICENSE PLATE LIGHT ASSEMBLY
  1. w/ Smart Entry and Start System:
    (Click here)

  1. w/o Smart Entry and Start System:
    (Click here)


8. REMOVE DOOR ELECTRICAL KEY SWITCH COVER (w/ Smart Entry and Start System)
  1. Remove the door electrical key switch cover.

← REMOVAL (Oct 2014 – Dec 2016)INSTALLATION (Oct 2014 – Dec 2016) →