After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (- ) battery terminal notices before proceeding with work (Click here).
2.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
3.
REMOVE REAR NO. 1 SEAT ASSEMBLY
First row:
Remove the 3 bolts, nut and rear No.1 seat assembly.
Second row:
Remove the 2 bolts, 2 nuts and rear No.1 seat assembly.
4.
REMOVE REAR NO. 2 SEAT ASSEMBLY
Remove the 4 bolts, 2 nuts and rear No.2 seat assembly.
HINT:
Use the same procedure for the second row.
Use the same procedure for the third row.
5.
REMOVE REAR NO. 3 SEAT ASSEMBLY
for Bench Type Seatback: Remove the rear No. 3 seat assembly (Click here).
for Separate Type Seatback: Remove the rear No. 3 seat assembly (Click here).
6.
REMOVE REAR NO. 4 SEAT ASSEMBLY
Remove the 3 bolts and 2 nuts.
Pull the lever in the direction indicated by the arrow in the illustration, release the 2 locks, and remove the rear No.4 seat assembly.
7.
REMOVE REAR SEAT BELT ASSEMBLY OUTER
Remove the bolt and disconnect the floor side of the rear seat belt assembly outer.
Using a screwdriver, detach the 4 claws and open the shoulder side cover of the rear seat belt assembly outer.
HINT:
Tape the screwdriver tip before use.
Loosen the bolt and disconnect the shoulder side of the rear seat belt assembly outer.
Loosen the bolt and remove the rear seat belt assembly outer.
for Rear No. 1 Seat Bench Seat Type:
w/ Cover: Detach the 3 claws and 3 guides, and then remove the side trim cover.
Loosen the bolt and disconnect the floor side of the rear seat belt assembly outer.
Text in Illustration
*A
w/o Cover
*B
w/ Cover
Using a screwdriver, detach the 2 claws and open the shoulder side cover of the rear seat belt assembly outer.
HINT:
Tape the screwdriver tip before use.
Loosen the bolt and disconnect the shoulder side of the rear seat belt assembly outer.
Loosen the bolt.
Detach the 2 claws and remove the retractor cover of the rear seat belt assembly outer.
Remove the 2 bolts and rear seat belt assembly outer.
w/ Cover:
Remove the bolt from the floor side of the rear seat belt assembly outer.
Remove the side trim cover from the rear seat belt assembly outer.
8.
REMOVE REAR NO. 2 SEAT BELT ASSEMBLY OUTER
Remove the bolt and disconnect the floor side of the rear No. 2 seat belt assembly outer.
Using a screwdriver, detach the 2 claws and open the shoulder side cover of the rear No. 2 seat belt assembly outer.
HINT:
Tape the screwdriver tip before use.
Remove the bolt and disconnect the shoulder side of the rear No. 2 seat belt assembly outer.
Remove the bolt and rear No. 2 seat belt assembly outer.
9.
REMOVE REAR NO. 3 SEAT BELT ASSEMBLY OUTER
Remove the bolt and disconnect the floor side of the rear No. 3 seat belt assembly outer.
Using a screwdriver, detach the 4 claws and open the shoulder side cover of the rear No. 3 seat belt assembly outer.
HINT:
Tape the screwdriver tip before use.
Loosen the bolt and disconnect the shoulder side of the rear No. 3 seat belt assembly outer.
Using a screwdriver, detach the 4 claws and remove the retractor cover of the rear No. 3 seat belt assembly outer.
HINT:
Tape the screwdriver tip before use.
Remove the bolt and rear No. 3 seat belt assembly outer.
10.
REMOVE REAR NO. 4 SEAT BELT ASSEMBLY OUTER
Remove the bolt and disconnect the floor side of the rear No. 4 seat belt assembly outer.
Using a screwdriver, detach the 2 claws and open the shoulder side cover of the rear No. 4 seat belt assembly outer.
HINT:
Tape the screwdriver tip before use.
Remove the bolt and disconnect the shoulder side of the rear No. 4 seat belt assembly outer.
Using a screwdriver, detach the 4 claws and remove the retractor cover of the rear No. 4 seat belt assembly outer.
HINT:
Tape the screwdriver tip before use.
Remove the bolt and rear No. 4 seat belt assembly outer.
11.
REMOVE FRONT DOOR SCUFF PLATE LH
Detach the 5 clips and remove the front door scuff plate LH.
12.
REMOVE FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.
13.
REMOVE FRONT DOOR OPENING TRIM LH
14.
REMOVE FRONT DOOR OPENING TRIM RH
15.
DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH
Remove the bolt and disconnect front seat outer belt assembly RH.
Using a screwdriver, detach the 2 claws and open the cover.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*1
Protective Tape
Remove the bolt and disconnect front seat outer belt assembly RH.
16.
REMOVE CENTER PILLAR GARNISH COVER LOWER LH
Using a screwdriver, detach the 4 claws and remove the center pillar garnish cover lower LH.
HINT:
Tape the screwdriver tip before use.
17.
REMOVE SEAT ASSEMBLY LH
Disconnect connector.
Remove the nut and 3 bolts.
Remove the seat assembly LH.
18.
REMOVE SEAT BELT ANCHOR COVER
Remove the 2 clips.
Detach the claw and then remove the seat belt anchor cover.
19.
DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH
Remove the bolt and disconnect the front seat outer belt assembly LH.
Using a screwdriver, detach the 2 claws and open the cover.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*1
Protective Tape
Remove the bolt and disconnect the front seat outer belt assembly LH.
20.
REMOVE REAR DOOR SCUFF PLATE RH
Detach the 11 clips and remove the rear door scuff plate RH.
21.
REMOVE SLIDE DOOR WEATHERSTRIP NO. 1 RH
22.
REMOVE BACK DOOR SCUFF PLATE
Detach the 7 clips and 4 claws and remove the back door scuff plate.