REMOVAL
Removal / installation · Vehicles built Jan 2015 – Mar 2016
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (- ) battery terminal notices before proceeding with work (Click here).
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 3. REMOVE FRONT DOOR SCUFF PLATE LH |
Detach the 5 clips and remove the front door scuff plate LH.

| 4. REMOVE FRONT DOOR SCUFF PLATE RH |
Detach the 5 clips and remove the front door scuff plate RH.

| 5. REMOVE FRONT DOOR OPENING TRIM LH |
| 6. REMOVE FRONT DOOR OPENING TRIM RH |
| 7. REMOVE SLIDE DOOR WEATHERSTRIP NO. 1 RH |
| 8. REMOVE FRONT ASSIST GRIP PLUG NO. 1 |
Using a screwdriver, detach the 4 claws and remove the 2 front assist grip plugs No. 1.

- HINT:
- Tape the screwdriver tip before use.
- Use the same procedures described for the other side.
- Tape the screwdriver tip before use.
| 9. REMOVE ASSIST GRIP ASSEMBLY |
Remove the 2 screws and assist grip assembly.

- HINT:
- Use the same procedures described for the other side.
| 10. REMOVE ASSIST GRIP |
Using a screwdriver, detach the 6 claws and open the 2 assist grip covers.

- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1
Protective Tape
Remove the 2 screws and assist grip.

| 11. REMOVE FRONT PILLAR GARNISH LH (w/o Rear Air Conditioning System) |
Remove the 2 clips.

Detach the 3 clips and remove the front pillar garnish LH.
| 12. REMOVE FRONT PILLAR GARNISH RH (w/o Rear Air Conditioning System) |
Detach the 3 clips and remove the front pillar garnish RH.
| 13. REMOVE FRONT PILLAR GARNISH LH (w/ Rear Air Conditioning System) |
Detach the clip and claw and remove the front pillar garnish LH.

| 14. REMOVE FRONT PILLAR GARNISH RH (w/ Rear Air Conditioning System) |
- HINT:
- Use the same procedures described for the LH side.
| 15. REMOVE ROOM LIGHT ASSEMBLY NO. 1 |
Using a screwdriver, detach the 4 claws and remove the light cover.

- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1
Protective Tape
Remove the 2 screws and room light assembly No. 1.

Disconnect the connector.
| 16. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH (w/ Rear Air Conditioning System) |
Remove the bolt and disconnect front seat outer belt assembly RH.

Using a screwdriver, detach the 2 claws and open the cover.

- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1
Protective Tape
Remove the bolt and disconnect front seat outer belt assembly RH.

| 17. REMOVE SEPARATOR BAR BRACKET LOWER (w/ Rear Air Conditioning System) |
Remove the screw and separator bar bracket lower.

- HINT:
- Use the same procedure described for the other side.
| 18. REMOVE CENTER PILLAR GARNISH LOWER RH (w/ Rear Air Conditioning System) |
Remove the clip.

Using a screwdriver, detach the 4 clips and remove the center pillar garnish lower RH.
- HINT:
- Tape the screwdriver tip before use.
| 19. REMOVE CENTER PILLAR GARNISH COVER LOWER LH (w/ Rear Air Conditioning System) |
Using a screwdriver, detach the 4 claws and remove the center pillar garnish cover lower LH.

- HINT:
- Tape the screwdriver tip before use.
| 20. REMOVE SEAT ASSEMBLY LH (w/ Rear Air Conditioning System) |
Disconnect connector.
Remove the nut and 3 bolts.

Remove the seat assembly LH.
| 21. REMOVE SEAT BELT ANCHOR COVER (w/ Rear Air Conditioning System) |
Remove the 2 clips.

Detach the claw and then remove the seat belt anchor cover.
| 22. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH (w/ Rear Air Conditioning System) |
Remove the bolt and disconnect the front seat outer belt assembly LH.

Using a screwdriver, detach the 2 claws and open the cover.

- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1
Protective Tape
Remove the bolt and disconnect the front seat outer belt assembly LH.

| 23. REMOVE CENTER PILLAR GARNISH LOWER LH (w/ Rear Air Conditioning System) |
Using a screwdriver, detach the 4 clips and remove the center pillar garnish lower LH.

| 24. REMOVE CENTER PILLAR GARNISH RH (w/ Rear Air Conditioning System) |
Remove the clip.

Using a screwdriver, detach the 2 clips and claw, and remove the center pillar garnish RH.
- HINT:
- Tape the screwdriver tip before use.
| 25. REMOVE ENGINE SERVICE HOLE COVER HOOK NO. 2 LH |
Remove the screw and the engine service hole cover hook No. 2 LH.

| 26. REMOVE CENTER PILLAR GARNISH LH (w/ Rear Air Conditioning System) |
Using a screwdriver, detach the 3 clips and claw, and remove the center pillar garnish LH.

| 27. REMOVE ROOM LIGHT ASSEMBLY NO. 2 |
- HINT:
- Use the same procedure described for the other side.
Using a screwdriver, detach the 4 claws and remove the light cover.

- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1
Protective Tape
Remove the 2 screws and room light assembly No. 2.

Disconnect the connector.
| 28. REMOVE ROOF HEADLINING MOULDING (for Standard Body) |
for Standard roof type:

Detach the 7 clips and remove the roof headlining moulding.- HINT:
- Use the same procedures described for the other side.
- If any clip remains on the body side, use a clip remover.
- Use the same procedures described for the other side.
for High roof type:

Detach the 9 clips and remove the roof headlining moulding.- HINT:
- Use the same procedures described for the other side.
- If any clip remains on the body side, use a clip remover.
- Use the same procedures described for the other side.
| 29. REMOVE ROOF HEADLINING MOULDING (for Wide Body) |
w/o Rear Air Conditioning System:
Detach the 27 clips and remove the 3 roof headlining mouldings.
w/ Rear Air Conditioning System:
Detach the 18 clips and remove the 2 roof headlining mouldings.

Text in Illustration *A
w/o Rear Air Conditioning System
*B
w/ Rear Air Conditioning System
- HINT:
- If any clip remains on the body side, use a clip remover.
| 30. REMOVE ROOF CLIP |
Using a screwdriver, detach the 2 claws and remove the roof clip.

- HINT:
- Tape the screwdriver tip before use.
| 31. REMOVE ROOF HEADLINING NO. 4 |
for Standard Body, High Roof, w/o Rear Air Conditioning System:
Remove the 13 clips and remove the roof headlining No. 4.
for Standard Body, High Roof, w/ Rear Air Conditioning System:
Remove the 13 clips and remove the roof headlining No. 4.
for Wide Body, w/o Rear Air Conditioning System:
Remove the 17 clips and remove the roof headlining No. 4.
for Wide Body, w/ Rear Air Conditioning System:
Remove the 17 clips and remove the roof headlining No. 4.

Text in Illustration *A
for Standard Body, High Roof, w/o Rear Air Conditioning System
*B
for Standard Body, High Roof, w/ Rear Air Conditioning System
*C
for Wide Body, w/o Rear Air Conditioning System
*D
for Wide Body, w/ Rear Air Conditioning System
| 32. REMOVE ROOF HEADLINING NO. 3 |
for Standard Body, Standard Roof, w/o Rear Air Conditioning System:
Remove the 13 clips and remove the roof headlining No. 3.
for Standard Body, Standard Roof, w/ Rear Air Conditioning System:
Remove the 13 clips and remove the roof headlining No. 3.
for Standard Body, High Roof, w/o Rear Air Conditioning System:
Remove the 3 clips and remove the roof headlining No. 3.
for Standard Body, High Roof, w/ Rear Air Conditioning System:
Remove the 3 clips and remove the roof headlining No. 3.
for Wide Body, w/o Rear Air Conditioning System:
Remove the 10 clips and remove the roof headlining No. 3.
for Wide Body, w/ Rear Air Conditioning System:
Remove the 10 clips and remove the roof headlining No. 3.

Text in Illustration *A
for Standard Body, Standard Roof, w/o Rear Air Conditioning System
*B
for Standard Body, Standard Roof, w/ Rear Air Conditioning System
*C
for Standard Body, High Roof, w/o Rear Air Conditioning System
*D
for Standard Body, High Roof, w/ Rear Air Conditioning System
*E
for Wide Body, w/o Rear Air Conditioning System
*F
for Wide Body, w/ Rear Air Conditioning System
| 33. REMOVE ROOF HEADLINING NO. 2 |
for Standard Body, Standard Roof, w/o Rear Air Conditioning System:
Remove the 16 clips and remove the roof headlining No. 2.
for Standard Body, Standard Roof, w/ Rear Air Conditioning System:
Remove the 3 clips and remove the roof headlining No. 2.
for Standard Body, High Roof, w/o Rear Air Conditioning System:
Remove the 3 clips and remove the roof headlining No. 2.
for Wide Body, w/o Rear Air Conditioning System:
Remove the 5 clips and remove the roof headlining No. 2.

Text in Illustration *A
for Standard Body, Standard Roof, w/o Rear Air Conditioning System
*B
for Standard Body, Standard Roof, w/ Rear Air Conditioning System
*C
for Standard Body, High Roof, w/o Rear Air Conditioning System
*D
for Wide Body, w/o Rear Air Conditioning System
| 34. REMOVE REAR COOLER CONTROL PANEL (w/ Rear Air Conditioning System) |
Release the 4 clips and 4 claws, and disconnect the rear cooler control panel.

Disconnect the connector and remove the rear cooler control panel.
| 35. REMOVE VISOR ASSEMBLY LH |
Remove the 2 screws and visor assembly LH.

| 36. REMOVE VISOR ASSEMBLY RH |
- HINT:
- Use the same procedures described for the LH side.
| 37. REMOVE VISOR HOLDER |
- HINT:
- Use the same procedures described for the other side.
Remove the screw.

Using a moulding remover, detach the claw and remove the visor holder.
| 38. REMOVE ROOF HEADLINING NO. 1 |
w/ Rear Air Conditioning System:
Remove the 4 screws.
for Standard Body, Standard Roof, w/o Rear Air Conditioning System:
Detach the clip and remove the roof headlining No. 1.
for Standard Body, Standard Roof, w/ Rear Air Conditioning System:
for 4 Door:
Detach the 5 clips and remove the roof headlining No. 1.for 5 Door:
Detach the 7 clips and remove the roof headlining No. 1.
for Standard Body, High Roof, w/o Rear Air Conditioning System:
Detach the 3 clips and remove the roof headlining No. 1.
for Standard Body, High Roof, w/ Rear Air Conditioning System:
Detach the 5 clips and remove the roof headlining No. 1.
for Wide Body, w/o Rear Air Conditioning System:
Detach the 7 clips and remove the roof headlining No. 1.
for Wide Body, w/ Rear Air Conditioning System:
Detach the 9 clips and remove the roof headlining No. 1.

Text in Illustration *A
for Standard Body, Standard Roof, w/o Rear Air Conditioning System
*B
for Standard Body, Standard Roof, w/ Rear Air Conditioning System
*C
for Standard Body, High Roof, w/o Rear Air Conditioning System
*D
for Standard Body, High Roof, w/ Rear Air Conditioning System
*E
for Wide Body, w/o Rear Air Conditioning System
*F
for Wide Body, w/ Rear Air Conditioning System
*G
for 5 Door
-
-
