2014-2019 Hiace · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built Apr 2016 – Dec 2016

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (- ) battery terminal notices before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE FRONT DOOR SCUFF PLATE LH

  1. B115746
    Detach the 5 clips and remove the front door scuff plate LH.


4. REMOVE FRONT DOOR SCUFF PLATE RH

  1. B369045
    Detach the 5 clips and remove the front door scuff plate RH.


5. REMOVE FRONT DOOR OPENING TRIM LH

6. REMOVE FRONT DOOR OPENING TRIM RH

7. REMOVE SLIDE DOOR WEATHERSTRIP NO. 1 RH

8. REMOVE FRONT ASSIST GRIP PLUG NO. 1

  1. B113343
    Using a screwdriver, detach the 4 claws and remove the 2 front assist grip plugs No. 1.

    HINT:
    1. Tape the screwdriver tip before use.
    2. Use the same procedures described for the other side.


9. REMOVE ASSIST GRIP ASSEMBLY

  1. B113344
    Remove the 2 screws and assist grip assembly.

    HINT:
    Use the same procedures described for the other side.


10. REMOVE ASSIST GRIP

  1. B103023E02
    Using a screwdriver, detach the 6 claws and open the 2 assist grip covers.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape

  1. B103024
    Remove the 2 screws and assist grip.


11. REMOVE FRONT PILLAR GARNISH LH (w/o Rear Air Conditioning System)

  1. B112982
    Remove the 2 clips.

  1. Detach the 3 clips and remove the front pillar garnish LH.


12. REMOVE FRONT PILLAR GARNISH RH (w/o Rear Air Conditioning System)
  1. Detach the 3 clips and remove the front pillar garnish RH.


13. REMOVE FRONT PILLAR GARNISH LH (w/ Rear Air Conditioning System)

  1. B113345
    Detach the clip and claw and remove the front pillar garnish LH.


14. REMOVE FRONT PILLAR GARNISH RH (w/ Rear Air Conditioning System)

HINT:
Use the same procedures described for the LH side.


15. REMOVE ROOM LIGHT ASSEMBLY NO. 1

  1. B103035E03
    Using a screwdriver, detach the 4 claws and remove the light cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape

  1. B103034
    Remove the 2 screws and room light assembly No. 1.

  1. Disconnect the connector.


16. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH (w/ Rear Air Conditioning System)

  1. B103254
    Remove the bolt and disconnect front seat outer belt assembly RH.

  1. B101641E02
    Using a screwdriver, detach the 2 claws and open the cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape

  1. B101642
    Remove the bolt and disconnect front seat outer belt assembly RH.


17. REMOVE SEPARATOR BAR BRACKET LOWER (w/ Rear Air Conditioning System)

  1. B102494
    Remove the screw and separator bar bracket lower.

    HINT:
    Use the same procedure described for the other side.


18. REMOVE CENTER PILLAR GARNISH LOWER RH (w/ Rear Air Conditioning System)

  1. B106189E01
    Remove the clip.

  1. Using a screwdriver, detach the 4 clips and remove the center pillar garnish lower RH.

    HINT:
    Tape the screwdriver tip before use.


19. REMOVE CENTER PILLAR GARNISH COVER LOWER LH (w/ Rear Air Conditioning System)

  1. B102497E01
    Using a screwdriver, detach the 4 claws and remove the center pillar garnish cover lower LH.

    HINT:
    Tape the screwdriver tip before use.


20. REMOVE SEAT ASSEMBLY LH (w/ Rear Air Conditioning System)
  1. Disconnect connector.

  1. B106197
    Remove the nut and 3 bolts.

  1. Remove the seat assembly LH.


21. REMOVE SEAT BELT ANCHOR COVER (w/ Rear Air Conditioning System)

  1. B103255E01
    Remove the 2 clips.

  1. Detach the claw and then remove the seat belt anchor cover.


22. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH (w/ Rear Air Conditioning System)

  1. B103256
    Remove the bolt and disconnect the front seat outer belt assembly LH.

  1. B103245E02
    Using a screwdriver, detach the 2 claws and open the cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape

  1. B103246
    Remove the bolt and disconnect the front seat outer belt assembly LH.


23. REMOVE CENTER PILLAR GARNISH LOWER LH (w/ Rear Air Conditioning System)

  1. B106182E01
    Using a screwdriver, detach the 4 clips and remove the center pillar garnish lower LH.


24. REMOVE CENTER PILLAR GARNISH RH (w/ Rear Air Conditioning System)

  1. B106190E01
    Remove the clip.

  1. Using a screwdriver, detach the 2 clips and claw, and remove the center pillar garnish RH.

    HINT:
    Tape the screwdriver tip before use.


25. REMOVE ENGINE SERVICE HOLE COVER HOOK NO. 2 LH

  1. B102500
    Remove the screw and the engine service hole cover hook No. 2 LH.


26. REMOVE CENTER PILLAR GARNISH LH (w/ Rear Air Conditioning System)

  1. B106183E01
    Using a screwdriver, detach the 3 clips and claw, and remove the center pillar garnish LH.


27. REMOVE ROOM LIGHT ASSEMBLY NO. 2

HINT:
Use the same procedure described for the other side.

  1. B103035E03
    Using a screwdriver, detach the 4 claws and remove the light cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape

  1. B103034
    Remove the 2 screws and room light assembly No. 2.

  1. Disconnect the connector.


28. REMOVE ROOF HEADLINING MOULDING (for Standard Body)

  1. B103036E02
    for Standard roof type:
    Detach the 7 clips and remove the roof headlining moulding.

    HINT:
    1. Use the same procedures described for the other side.
    2. If any clip remains on the body side, use a clip remover.

  1. B103038E01
    for High roof type:
    Detach the 9 clips and remove the roof headlining moulding.

    HINT:
    1. Use the same procedures described for the other side.
    2. If any clip remains on the body side, use a clip remover.


29. REMOVE ROOF HEADLINING MOULDING (for Wide Body)
  1. w/o Rear Air Conditioning System:
    Detach the 27 clips and remove the 3 roof headlining mouldings.

  1. w/ Rear Air Conditioning System:
    Detach the 18 clips and remove the 2 roof headlining mouldings.

    B112940E04

    Text in Illustration 
    *A
    w/o Rear Air Conditioning System
    *B
    w/ Rear Air Conditioning System

    HINT:
    If any clip remains on the body side, use a clip remover.


30. REMOVE ROOF CLIP

  1. B103037E01
    Using a screwdriver, detach the 2 claws and remove the roof clip.

    HINT:
    Tape the screwdriver tip before use.


31. REMOVE ROOF HEADLINING NO. 4
  1. for Standard Body, High Roof, w/o Rear Air Conditioning System:
    Remove the 13 clips and remove the roof headlining No. 4.

  1. for Standard Body, High Roof, w/ Rear Air Conditioning System:
    Remove the 13 clips and remove the roof headlining No. 4.

  1. for Wide Body, w/o Rear Air Conditioning System:
    Remove the 17 clips and remove the roof headlining No. 4.

  1. for Wide Body, w/ Rear Air Conditioning System:
    Remove the 17 clips and remove the roof headlining No. 4.

    B366714E01

    Text in Illustration 
    *A
    for Standard Body, High Roof, w/o Rear Air Conditioning System
    *B
    for Standard Body, High Roof, w/ Rear Air Conditioning System
    *C
    for Wide Body, w/o Rear Air Conditioning System
    *D
    for Wide Body, w/ Rear Air Conditioning System


32. REMOVE ROOF HEADLINING NO. 3
  1. for Standard Body, Standard Roof, w/o Rear Air Conditioning System:
    Remove the 13 clips and remove the roof headlining No. 3.

  1. for Standard Body, Standard Roof, w/ Rear Air Conditioning System:
    Remove the 13 clips and remove the roof headlining No. 3.

  1. for Standard Body, High Roof, w/o Rear Air Conditioning System:
    Remove the 3 clips and remove the roof headlining No. 3.

  1. for Standard Body, High Roof, w/ Rear Air Conditioning System:
    Remove the 3 clips and remove the roof headlining No. 3.

  1. for Wide Body, w/o Rear Air Conditioning System:
    Remove the 10 clips and remove the roof headlining No. 3.

  1. for Wide Body, w/ Rear Air Conditioning System:
    Remove the 10 clips and remove the roof headlining No. 3.

    B366715E01

    Text in Illustration 
    *A
    for Standard Body, Standard Roof, w/o Rear Air Conditioning System
    *B
    for Standard Body, Standard Roof, w/ Rear Air Conditioning System
    *C
    for Standard Body, High Roof, w/o Rear Air Conditioning System
    *D
    for Standard Body, High Roof, w/ Rear Air Conditioning System
    *E
    for Wide Body, w/o Rear Air Conditioning System
    *F
    for Wide Body, w/ Rear Air Conditioning System


33. REMOVE ROOF HEADLINING NO. 2
  1. for Standard Body, Standard Roof, w/o Rear Air Conditioning System:
    Remove the 16 clips and remove the roof headlining No. 2.

  1. for Standard Body, Standard Roof, w/ Rear Air Conditioning System:
    Remove the 3 clips and remove the roof headlining No. 2.

  1. for Standard Body, High Roof, w/o Rear Air Conditioning System:
    Remove the 3 clips and remove the roof headlining No. 2.

  1. for Wide Body, w/o Rear Air Conditioning System:
    Remove the 5 clips and remove the roof headlining No. 2.

    B112944E04

    Text in Illustration 
    *A
    for Standard Body, Standard Roof, w/o Rear Air Conditioning System
    *B
    for Standard Body, Standard Roof, w/ Rear Air Conditioning System
    *C
    for Standard Body, High Roof, w/o Rear Air Conditioning System
    *D
    for Wide Body, w/o Rear Air Conditioning System


34. REMOVE REAR COOLER CONTROL PANEL (w/ Rear Air Conditioning System)

  1. E108775E01
    Release the 4 clips and 4 claws, and disconnect the rear cooler control panel.

  1. Disconnect the connector and remove the rear cooler control panel.


35. REMOVE VISOR ASSEMBLY LH

  1. B113346
    Remove the 2 screws and visor assembly LH.


36. REMOVE VISOR ASSEMBLY RH

HINT:
Use the same procedures described for the LH side.


37. REMOVE VISOR HOLDER

HINT:
Use the same procedures described for the other side.

  1. B103025
    Remove the screw.

  1. Using a moulding remover, detach the claw and remove the visor holder.


38. REMOVE ROOF HEADLINING NO. 1
  1. w/ Rear Air Conditioning System:
    Remove the 4 screws.

  1. for Standard Body, Standard Roof, w/o Rear Air Conditioning System:
    Detach the clip and remove the roof headlining No. 1.

  1. for Standard Body, Standard Roof, w/ Rear Air Conditioning System:

    1. for 4 Door:
      Detach the 5 clips and remove the roof headlining No. 1.

    2. for 5 Door:
      Detach the 7 clips and remove the roof headlining No. 1.

  1. for Standard Body, High Roof, w/o Rear Air Conditioning System:
    Detach the 3 clips and remove the roof headlining No. 1.

  1. for Standard Body, High Roof, w/ Rear Air Conditioning System:
    Detach the 5 clips and remove the roof headlining No. 1.

  1. for Wide Body, w/o Rear Air Conditioning System:
    Detach the 7 clips and remove the roof headlining No. 1.

  1. for Wide Body, w/ Rear Air Conditioning System:
    Detach the 9 clips and remove the roof headlining No. 1.

    B366420E01

    Text in Illustration 
    *A
    for Standard Body, Standard Roof, w/o Rear Air Conditioning System
    *B
    for Standard Body, Standard Roof, w/ Rear Air Conditioning System
    *C
    for Standard Body, High Roof, w/o Rear Air Conditioning System
    *D
    for Standard Body, High Roof, w/ Rear Air Conditioning System
    *E
    for Wide Body, w/o Rear Air Conditioning System
    *F
    for Wide Body, w/ Rear Air Conditioning System
    *G
    for 5 Door
    -
    -

← REMOVAL (Jan 2015 – Mar 2016)REMOVAL (from Jan 2017) →