HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built from Jan 2017
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Nov 2015 Dec 2015 – Dec 2016 from Jan 2017
*: Use the intelligent tester.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.CUSTOMER PROBLEM ANALYSIS |
| |||||
| 3.CONNECT INTELLIGENT TESTER TO DLC3* |
- HINT:
- If the display indicates a communication fault in the intelligent tester, inspect the DLC3.
| |||||
| 4.CHECK DTC AND FREEZE FRAME DATA* |
Check for DTCs (Click here) and freeze frame data.
- HINT:
- Record or print DTCs and freeze frame data, if necessary.
| |||||
| 5.CLEAR DTC AND FREEZE FRAME DATA* |
Clear the DTCs and freeze frame data (Click here).
| |||||
| 6.CONDUCT VISUAL INSPECTION |
| |||||
| 7.SELECT CHECK MODE DIAGNOSIS* |
Switch the ECM from normal mode to check mode.
- HINT:
- Refer to Check Mode Procedure (Click here).
| |||||
| 8.CONFIRM PROBLEM SYMPTOMS |
Confirm problem symptoms.
- HINT:
- Refer to Problem Symptoms Table (Click here).
- If the engine does not start, first perform the "Check DTC" procedure and "Conduct Basic Inspection" procedure below.
- Refer to Problem Symptoms Table (Click here).
| Result |
Proceed To |
| Malfunction does not occur |
A |
| Malfunction occurs |
B |
|
|||||
| |||||
| 9.SIMULATE SYMPTOMS |
| |||||
| 10.DTC CHECK* |
Check for DTCs.
- HINT:
- Refer to DTC Check / Clear (Click here).
| Result |
Proceed To |
| Trouble code output |
A |
| No code |
B |
|
|||||
| |||||
| 11.REFER TO DTC CHART |
- HINT:
- Refer to Diagnostic Trouble Code Chart (Click here).
| |||||
| 12.CONDUCT BASIC INSPECTION |
Conduct basic inspection.
- HINT:
- Refer to Basic Inspection (Click here).
| Result |
Proceed To |
| Malfunctioning parts not confirmed |
A |
| Malfunctioning parts confirmed |
B |
|
|||||
| |||||
| 13.REFER TO PROBLEM SYMPTOMS TABLE |
- HINT:
- Refer to Problem Symptoms Table (Click here).
| Result |
Proceed To |
| Malfunctioning parts not confirmed |
A |
| Malfunctioning parts confirmed |
B |
|
|||||
| |||||
| 14.CHECK ECM POWER SOURCE CIRCUIT |
Check the ECM power source circuit.
- HINT:
- Refer to ECM Power Source Circuit (Click here).
| |||||
| 15.CIRCUIT INSPECTION |
| Result |
Proceed To |
| Malfunction not confirmed |
A |
| Malfunction confirmed |
B |
|
|||||
| |||||
| 16.CHECK FOR INTERMITTENT PROBLEMS |
Check for intermittent problems.
- HINT:
- Refer to Check for Intermittent Problems (Click here).
| |||||
| 17.CONDUCT PARTS INSPECTION |
| |||||
| 18.IDENTIFICATION OF PROBLEM |
| |||||
| 19.ADJUSTMENT AND/OR REPAIR |
| |||||
| 20.CONDUCT CONFIRMATION TEST |
| |||||