2014-2019 Hiace · Service Manual ENGINE

BASIC INSPECTION

Troubleshooting · Vehicles built from Jan 2015

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015

When a malfunction is not confirmed by the DTC check, troubleshooting should be carried out in all circuits considered to be possible causes of the problem. In many cases, by carrying out the basic engine check shown in the following flowchart, the location of the problem can be found quickly and efficiently. Therefore, using this check is essential for engine troubleshooting.

1.CHECK BATTERY VOLTAGE

    CAUTION:
    Carry out this check with the engine stopped and ignition switch OFF.

    Result
    Proceed To
    11 V or more
    A
    Below 11 V
    B

B.
A

2.CHECK IF ENGINE CRANKS

    NG.
    OK

    3.CHECK ENGINE STARTS

      NG.
      OK

      4.CHECK AIR FILTER
      1. Visually check that the air filter is not contaminated with dirt or oil.


      NG.
      OK

      5.CHECK IDLING SPEED
      1. Check idling speed (Click here).


      NG.
      OK

      6.CHECK FUEL PRESSURE
      1. Check fuel pressure (Click here).


      NG.
      OK

      7.CHECK FOR SPARKS
      1. Check for sparks (Click here).


      NG.
      OK

      ← BASIC INSPECTION (Oct 2014 – Dec 2014)PROBLEM SYMPTOMS TABLE (Oct 2014 – Dec 2014) →