2014-2019 Hiace · Service Manual STEERING

DISASSEMBLY

Removal / installation · Vehicles built from Oct 2014


1. REMOVE POWER STEERING SUCTION PORT UNION

  1. C106277
    Remove the bolt and the power steering suction port union.

  1. Using a screwdriver, remove the O-ring from the power steering suction port union.


2. REMOVE FLOW CONTROL VALVE

  1. C106278
    Remove the pressure port union.

  1. Remove the O-ring from the pressure port union.

  1. Remove the flow control valve and the compression spring.


3. REMOVE REAR VANE PUMP HOUSING

  1. C106279
    Remove the 4 bolts and the rear vane pump housing.

  1. Remove the gasket.

  1. Remove the 2 O-rings from the rear vane pump housing.


4. REMOVE REAR VANE PUMP SIDE PLATE
  1. Remove the wave washer from the rear vane pump side plate.

  1. C106287
    Remove the rear vane pump side plate.


5. REMOVE VANE PUMP CAM RING

  1. C106286
    Remove the vane pump cam ring.


6. REMOVE VANE PUMP ROTOR
  1. Remove the 10 vane pump plates.

  1. C106281
    Using 2 screwdrivers, remove the vane pump shaft snap ring from the vane pump shaft.

  1. Remove the vane pump rotor.


7. REMOVE VANE PUMP SHAFT

8. REMOVE VANE PUMP HOUSING OIL SEAL

  1. C106280E01
    Using a screwdriver, remove the vane pump housing oil seal.

    NOTICE:
    Be careful not to damage the front vane pump housing.

← REMOVAL (from Oct 2014)INSPECTION (from Oct 2014) →