2014-2019 Hiace · Service Manual STEERING

REMOVAL

Removal / installation · Vehicles built from Oct 2014


1. DRAIN POWER STEERING FLUID

2. REMOVE FAN & GENERATOR V BELT

  1. A102135E01
    Use the hexagon-shaped part indicated by the arrow in the illustration to move the tensioner pulley downward and decrease the tension in the drive belt. Then remove the drive belt.

    NOTICE:
    When removing the drive belt, do not use the idle pulley's bolt.

    HINT:
    After removing the drive belt, move the tensioner upward to the maximum amount.


3. SEPARATE PRESSURE FEED TUBE ASSEMBLY

  1. C101366E01
    Remove the clip and the pressure feed tube assembly (return tube side).

  1. C101367E01
    Remove the union bolt and the pressure feed tube assembly (pressure feed tube side).

  1. Remove the gasket from the pressure feed tube assembly.


4. REMOVE VANE PUMP ASSEMBLY

  1. C101368E01
    Disconnect the oil pressure switch connector.

  1. C101369
    Remove the 2 bolts and the vane pump assembly.

← COMPONENTS (from Oct 2014)DISASSEMBLY (from Oct 2014) →