2014-2019 Hiace · Service Manual STEERING

DISASSEMBLY

Removal / installation · Vehicles built from Oct 2014


1. REMOVE VANE PUMP OIL RESERVOIR CAP SUB-ASSEMBLY
  1. Remove the vane pump oil reservoir cap sub-assembly from the vane pump oil reservoir assembly.


2. REMOVE VANE PUMP OIL RESERVOIR ASSEMBLY
  1. Remove the 3 bolts and the vane pump oil reservoir assembly from the vane pump assembly.

  1. Using a screwdriver, remove the O-ring from the vane pump oil reservoir assembly.


3. FIX VANE PUMP ASSEMBLY

  1. G029266E01
    Using SST, hold the vane pump assembly in a vise.
    SST
    09630-00014   (09631-00132)


4. REMOVE FLOW CONTROL VALVE

  1. G027253E01
    Remove the pressure port union.

  1. Remove the O-ring from the pressure port union.

  1. Remove the flow control valve and the compression spring.


5. REMOVE POWER STEERING OIL PRESSURE SWITCH
  1. Remove the power steering oil pressure switch from the front vane pump housing.


6. REMOVE REAR VANE PUMP HOUSING

  1. C084483E01
    Remove the 4 bolts and the rear vane pump housing.

  1. Remove the O-ring from the rear vane pump housing.


7. REMOVE VANE PUMP SHAFT WITH PULLEY

  1. C057767E01
    Using 2 screwdrivers, remove the vane pump shaft snap ring from the vane pump shaft with pulley.

  1. Remove the vane pump shaft with pulley.


8. REMOVE VANE PUMP ROTOR
  1. Remove the 10 vane pump plates.

  1. Remove the vane pump rotor.


9. REMOVE VANE PUMP CAM RING
  1. Remove the vane pump cam ring.


10. REMOVE FRONT VANE PUMP SIDE PLATE
  1. Remove the front vane pump side plate from the front vane pump housing.

  1. C101969
    Remove the O-ring from the front vane pump side plate.

  1. C101970
    Remove the O-ring from the front vane pump housing.


11. REMOVE VANE PUMP HOUSING OIL SEAL

  1. D030331E01
    Using a screwdriver, remove the vane pump housing oil seal from the front vane pump housing.

    NOTICE:
    Be careful not to damage the front vane pump housing.

← REMOVAL (from Oct 2014)INSPECTION (from Oct 2014) →