2014-2019 Hiace · Service Manual STEERING

INSTALLATION

Removal / installation · Vehicles built from Oct 2014


1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

2. INSTALL STEERING SLIDING YOKE SUB-ASSEMBLY

  1. C106145E01
    Align the matchmarks on the steering sliding yoke sub-assembly and the steering torque shaft assembly.

  1. Temporarily tighten the bolt.

    HINT:
    Do not torque the bolt.


3. INSTALL STEERING TORQUE SHAFT ASSEMBLY

  1. C106141E01
    Align the matchmarks on the steering torque shaft assembly and the steering bevel gear assembly.

  1. C106144
    Install the bolt.

    Torque:
    35 N*m{ 360 kgf*cm , 26 ft.*lbf }

  1. C106143E01
    Align the matchmarks on the steering torque shaft assembly and the power steering link assembly.

  1. C106142E01
    Install bolt (B) and tighten the 2 bolts.

    Torque:
    35 N*m{ 360 kgf*cm , 26 ft.*lbf }


4. INSTALL ENGINE UNDER COVER NO.1
← REMOVAL (from Oct 2014)COMPONENTS (from Oct 2014) →