2014-2019 Hiace · Service Manual STEERING

REMOVAL

Removal / installation · Vehicles built from Oct 2014


1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

2. FIX STEERING WHEEL POSITION

  1. C106138
    Fix the steering wheel with the seat belt in order to prevent rotation.

    HINT:
    This operation is useful to prevent damage to the spiral cable.


3. REMOVE ENGINE UNDER COVER NO.1

4. REMOVE STEERING TORQUE SHAFT ASSEMBLY

  1. C106142E01
    Loosen bolt (A) and remove bolt (B), then slide the steering torque shaft assembly.

    HINT:
    1. Do not remove bolt (A).
    2. Do not disconnect the steering torque shaft assembly from the power steering link assembly.

  1. C106143E01
    Put matchmarks on the steering torque shaft assembly and the power steering link assembly.

  1. Separate the steering torque shaft assembly from the power steering link assembly.

  1. C106144E01
    Remove the bolt and slide the steering torque shaft assembly.

  1. C106141E01
    Put matchmarks on the steering torque shaft assembly and the steering bevel gear assembly.

  1. Remove the steering torque shaft assembly from the steering bevel gear assembly.


5. REMOVE STEERING SLIDING YOKE SUB-ASSEMBLY

  1. C106145E01
    Put matchmarks on the steering sliding yoke sub-assembly and the steering torque shaft assembly.

  1. Remove the bolt and steering sliding yoke sub-assembly from the steering torque shaft assembly.

← COMPONENTS (from Oct 2014)INSTALLATION (from Oct 2014) →