INSTALLATION
Removal / installation · Vehicles built from Oct 2014
| 1. INSTALL STEERING BEVEL GEAR ASSEMBLY |
Install the steering bevel gear assembly with the 2 bolts.

- Torque:
- 44 N*m{ 449 kgf*cm , 33 ft.*lbf }
| 2. INSTALL STEERING BEVEL GEAR HOUSING BRACKET |
Install the steering bevel gear housing bracket with the 3 bolts.

- Torque:
- 44 N*m{ 449 kgf*cm , 33 ft.*lbf }
| 3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD |
| 4. CONNECT STEERING SLIDING YOKE SUB-ASSEMBLY |
Align the matchmarks on the steering sliding yoke sub-assembly and the steering bevel gear assembly.

Install bolt (B) and tighten the 2 bolts.

- Torque:
- 35 N*m{ 360 kgf*cm , 26 ft.*lbf }
| 5. INSTALL FAN SHROUD |
| 6. CONNECT OIL COOLER HOSE (for Automatic Transmission) |
| 7. INSTALL FAN BRACKET SUB-ASSEMBLY |
| 8. INSTALL ENGINE UNDER COVER NO.1 |
| 9. INSTALL STEERING INTERMEDIATE SHAFT |
Align the matchmarks on the steering intermediate shaft and the steering bevel gear assembly.

Install the bolt.
- Torque:
- 35 N*m{ 360 kgf*cm , 26 ft.*lbf }
| 10. INSTALL STEERING COLUMN HOLE COVER SUB-ASSEMBLY NO.1 |
Install the steering column hole cover sub-assembly No.1 with the 4 bolts.

- Torque:
- 8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
| 11. CONNECT STEERING INTERMEDIATE SHAFT ASSEMBLY NO.2 |
Align the matchmarks on the steering intermediate shaft assembly No.2 and the steering intermediate shaft.

Install bolt (B) and tighten the 2 bolts.

- Torque:
- 35 N*m{ 360 kgf*cm , 26 ft.*lbf }
| 12. INSTALL STEERING COLUMN HOLE COVER |
Install the steeling column hole cover with the 3 bolts.

- Torque:
- 8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
