2014-2019 Hiace · Service Manual STEERING

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT PRELOAD
  1. Turn the bevel gears No.1 and No.2 5 to 6 times to settle.

  1. C102434E01
    Using SST, measure the turning torque of the bevel gear No.1.
    SST
    09612-24014   (09616-10010)

    Preload (turning torque of bevel gear No.1):
    0.15 to 0.39 N*m (1.5 to 4.0 kgf*cm, 1.3 to 3.5 in.*lbf)

    If turning torque is not as specified, replace the steering bevel gear assembly.

← REMOVAL (from Oct 2014)INSTALLATION (from Oct 2014) →