2014-2019 Hiace · Service Manual BODY

REASSEMBLY

Removal / installation · Vehicles built Oct 2014 – Dec 2016

Versions by build date: Oct 2014 – Dec 2016 from Jan 2017


1. INSTALL NO.1 SEATBACK SPRING ASSEMBLY

2. INSTALL NO.1 SEATBACK PAD

3. INSTALL NO.1 SEATBACK COVER SUB-ASSEMBLY

  1. B107583E01
    Using hog ring pliers, install the No.1 seatback cover sub-assembly with 2 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.


4. INSTALL NO.1 SEATBACK COVER SUB-ASSEMBLY WITH PAD

5. INSTALL REAR SEAT HEADREST SUPPORT

6. INSTALL REAR SEAT HEADREST SUPPORT

7. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY (w/ Assist Grip)

8. INSTALL ASSIST GRIP (w/ Assist Grip)

9. INSTALL REAR SEAT CUSHION SHIELD INNER NO.1 RH

10. INSTALL REAR SEAT CUSHION SHIELD INNER NO.1 LH

11. INSTALL REAR SEAT HEADREST ASSEMBLY

12. INSTALL NO.1 SEAT LEG SUB-ASSEMBLY

  1. B107574
    Install the No.1 seat leg sub-assembly with the 4 bolts.

    Torque:
    41 N*m{ 418 kgf*cm , 30 ft.*lbf }


13. INSTALL NO.1 SEAT CUSHION PAD

14. INSTALL NO.1 SEAT CUSHION COVER SUB-ASSEMBLY

  1. B107584E01
    Using hog ring pliers, install the No.1 seat cushion cover sub-assembly with 8 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.


15. INSTALL NO.1 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD

16. INSTALL SEAT LAP TYPE BELT ASSEMBLY NO.1 (w/ Seat Lap Type Belt Assembly No.1)

  1. B107680
    Install the seat lap type belt assembly No.1 with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


17. INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)

  1. B107679
    Install the rear seat belt assembly inner with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


18. INSTALL REAR SEAT LEG SIDE COVER NO.4 (for Second Row)

19. INSTALL REAR SEAT LEG SIDE COVER NO.5

20. INSTALL RECLINING ADJUSTER COVER RH

21. INSTALL RECLINING ADJUSTER COVER LH

22. INSTALL RECLINING ADJUSTER RELEASE HANDLE NO.1
← DISASSEMBLY (from Jan 2017)REASSEMBLY (from Jan 2017) →