REASSEMBLY
Removal / installation · Vehicles built from Jan 2017
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| 1.
INSTALL NO. 1 SEATBACK SPRING ASSEMBLY |
|
| 2.
INSTALL NO. 1 SEATBACK PAD |
|
| 3.
INSTALL NO. 1 SEATBACK COVER SUB-ASSEMBLY |
 |
- Using hog ring pliers, install the No. 1 seatback cover sub-assembly with 2 new hog rings.
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
| 4.
INSTALL NO. 1 SEATBACK COVER SUB-ASSEMBLY WITH PAD |
|
| 5.
INSTALL REAR SEAT HEADREST SUPPORT |
|
| 6.
INSTALL REAR SEAT HEADREST SUPPORT |
|
| 7.
INSTALL REAR SEATBACK HOLDER (w/ Cup Holder) |
 |
- Engage the 2 guides and 2 clips to install the rear seatback holder.
| 8.
INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY (w/ Assist Grip) |
|
| 9.
INSTALL ASSIST GRIP (w/ Assist Grip) |
|
| 10.
INSTALL REAR SEAT CUSHION SHIELD INNER NO. 1 RH |
|
| 11.
INSTALL REAR SEAT CUSHION SHIELD INNER NO. 1 LH |
|
| 12.
INSTALL REAR SEAT HEADREST ASSEMBLY |
|
| 13.
INSTALL SEAT STAND FRAME CAP (for First Row) |
 |
- Install the seat stand frame cap to the No. 1 seat leg sub-assembly.
| 14.
INSTALL NO. 1 SEAT LEG SUB-ASSEMBLY |
 |
- Install the No. 1 seat leg sub-assembly with the 4 bolts.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 15.
INSTALL NO. 1 SEAT CUSHION PAD |
|
| 16.
INSTALL NO. 1 SEAT CUSHION COVER SUB-ASSEMBLY |
 |
- Using hog ring pliers, install the No. 1 seat cushion cover sub-assembly with 8 new hog rings.
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
| 17.
INSTALL NO. 1 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD |
|
| 18.
INSTALL SEAT LAP TYPE BELT ASSEMBLY NO. 1 (w/ Seat Lap Type Belt Assembly No. 1)
|
 |
- Install the seat lap type belt assembly No.1 with the bolt.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 19.
INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)
|
 |
- Install the rear seat belt assembly inner with the bolt.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 20.
INSTALL REAR SEAT LEG SIDE COVER NO. 4 (except First Row) |
|
| 21.
INSTALL REAR SEAT LEG SIDE COVER NO. 5 |
 |
except Third Row:
- Install the rear seat leg side cover No. 5.
for Third Row:
- Install the rear seat leg side cover No. 5.
| 22.
INSTALL RECLINING ADJUSTER COVER RH |
|
| 23.
INSTALL RECLINING ADJUSTER COVER LH |
|
| 24.
INSTALL RECLINING ADJUSTER RELEASE HANDLE NO. 1 |
|