Front Passenger Side Power Window Switch Power Source Circuit
Circuit diagnosis · Vehicles built from Oct 2014
DESCRIPTION
This circuit supplies power to operate the power window switch.WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. CHECK WIRE HARNESS (POWER WINDOW SWITCH) |
Disconnect the L6 (K6) connector.

Measure the voltage according to the value(s) in the table below.
- Standard voltage:
- LHD Models:
Tester Connection
Condition
Specified Condition
K6-4 (B) - Body ground
Always
10 to 14 V
- RHD Models:
Tester Connection
Condition
Specified Condition
L6-4 (B) - Body ground
Always
10 to 14 V
|
|
||||
| OK | ||
| ||
