2014-2019 Hiace · Service Manual BRAKE

FAIL-SAFE CHART

System information · Vehicles built Apr 2016 – Dec 2016

Versions by build date: Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017


FAIL-SAFE OPERATION
  1. If there is a problem with sensor signals or actuator systems, the skid control ECU prohibits power supply to the brake actuator assembly and informs the ECM of a VSC system malfunction.
    The brake actuator assembly turns off the solenoids and the ECM stops its VSC control according to signals from the skid control ECU. The vehicle will operate in a manner similar to a vehicle that is not equipped with ABS, TRC and VSC systems.
    ABS control will be prohibited, but EBD control will continue to the extent that EBD control is possible. If EBD control is impossible, the brake warning light will come on to warn the driver (Click here).
  2. If a VSC system component malfunctions before VSC control begins, VSC control will be prohibited. If a system component malfunctions during VSC control, the system will gradually stop performing control so as not to trigger a sudden change in vehicle operation.
    If it is impossible for control to continue, the warning light comes on to inform the driver of system control termination (Click here).
ABS, EBD and BA Systems 
Malfunction Area
Control Method
ABS system
ABS, BA, TRC and VSC control prohibited.
BA system
ABS, BA, TRC and VSC control prohibited.
EBD system
ABS, EBD, BA, TRC and VSC control prohibited.
TRC and VSC Systems 
Malfunction Area
Control Method
Engine control system
(TRC and VSC system)
Before control: Disables control.
During control: Uses only the brakes to perform control.
Brake control system
(VSC system)
Before control: Disables control.
During control: Uses only the engine to perform control.
Brake control system
(TRC system)
Before control: Disables control.
During control: Uses only the engine to perform control.
← FAIL-SAFE CHART (Jan 2015 – Mar 2016)FAIL-SAFE CHART (Jan 2017 – Nov 2017) →